Now downloading free:Sharp AR 5132
Sharp AR 5132 free download
Copier office machines (laser, ink-jet,multifunctional devices)| File information: | |
| File name: | Technical report.rar [preview AR 5132] |
| Size: | 2754 kB |
| Extension: | rar |
| Mfg: | Sharp |
| Model: | AR 5132 🔎 |
| Original: | |
| Descr: | Technical report |
| Group: | Electronics > Office equipment > Copiers |
| Uploaded: | 05-01-2016 |
| User: | arko123a |
| Multipart: | No multipart |
| Information about the files in archive: | ||
| Decompress result: | OK | |
| Extracted files: | 76 | |
File name ARE001.PDF Date : Feb. 23, 1995 DIGITAL COPIER : AR-5040 No. : ARE-001 PARTS CHANGE AND ADDITION 1.Model name: AR-5040 2.General: There have been changes and additions of parts in the model above from the start of mass production. 3.Description: 1. Addition of CCD protection sheet to CCD cover in the scanner unit CCD protection sheet (added) CCD cover (P/G 12 -28) 2. Parts' code change in the fiber fixing cushion of the scanner unit 3. Addition of FIN positioning spacer to the chassis joint plate in the finisher section 1/4 Green C SHARP CORPORATION Reprography Division Rear Chassis joint plate (P/G 48 ) , , Front Standard FIN positioning spacer (added) Standard 4. Parts' code change of TC spring of TC-AC case unit 5. Addition of polyslider and discontinuance of screw in the waste toner box unit A screw discontinued Polyslider (added) 6. Change of screws and discontinuance of open detection lever in the finisher unit 2/4 ,, , 0~1mm 7. Addition of a shield seal against light to the reflector in the copy lamp unit Slit Slit shield seal against light (two) Rear side Front side PSEL-0392FCZZ 0~1mm Slit end standard Slit end standard Attachment position (pointed by arrow) 8. Parts code change (for UK only) in the key operator guide manual 9. Parts code change in the CL lead cushion in front of the optical unit 10. Dicontinuance of the FIN paper guide and its attachment screw in the finisher frame unit 11. Parts' code change of the transport clutch in the paper feeding drive frame unit and the drive box upper unit 12. Addition of the discharge brush in the front side of the fusing unit Discharge brush (added) 3/4 Current parts Ref. No. Model name Version P/G No. Parts code New parts Parts code Price rank AN Parts name Effec- Intertive changetime ability Note 1 12 -- PSHEZ3759FCZZ CCD protection sheet Fiber fixing cushion FIN positioning spacer TC spring SE Polyslider 2 12 -27 PCUSS0308FCZZ PCUSF0324FCZZ AC 3 4 All 48 46 -13 40 -- MSPRP1550FCZZ -- XBPSD40P08KS0 (Q'ty: 2) XBPSD30P25K00 (Q'ty: 2) MLEVF0635FCZ1 -- PSPAZ0657FCZZ MSPRC2326FCZZ LX-WZ0117FCZZ (Q'ty: 2) Q'ty change 21 XBPSD30P25000 (Q'ty: 2) Discontinued PSEL-0392FCZZ (Q'ty: 2) TINSE1266FCZZ PCUSF0323FCZZ (Q'ty: 2) Discontinued Discontinued AB AE AB 5 40 AA Screw (M4x8) 47 -12 6 AR-5040 51 -91 7 USA only 13 AA -- AC Screw (M3x25) 1st lot Open dtect lever Slit shield seal against light Key operator guide manual CL lead cushion N FIN paper guide Screw (M3) -- 8 74 -17 4 -49 51 -133 TINSE1253FCZZ PCUSS0307FCZZ (Q'ty: 2) PGIDH1514FCZZ LX-BZ1028ACZZ (Q'ty: 3) BD 9 AE -- -- 10 All 51 -134 28 -10 11 36 -21 12 | ||
File name ARE002.PDF Date : Jun. 16, 1995 DIGITAL COPIER : AR-5040 No. : ARE-002 NOTIFICATION OF CHANGED PARTS AND NEW PARTS ADDITIONS. 1.Model name: AR-5040 2.General: Changes in parts codes and the addition of new parts have been carried out in the model listed above from the start of mass production and are hereby reported. 3.Description: 1. Change in the 100MXL belt in the finisher delivery guide frame unit. 2. Addition of protective sheets A and B for the PG edge on the upper surface of the delivery guide of the finisher delivery guide frame unit. Standard PG edge protective sheet A Upper surface of the delivery guide (P/G 57 -5) PG edge protective sheet B 3. Addition of delivery guide mylar to lower edge B of the delivery guide in the finisher delivery guide frame unit. Delivery guide mylar 1/6 Green C SHARP CORPORATION Reprography Division 4. Addition and resetting of AC cord. 5. Addition of parts and change in the screws of the conveyor guide unit in the front and rear frames. Front frame Change in screws LX-BZ0465FCZZ LX-BZ7025FCZZ (inch line in 4 locations) ADU Bottom plate LPLTM4664FCZZ Transport guide unit. Added transport sheet Added ADU Bottom plate bushing LBSHC0314FCZZ Center 2/6 Rear Frame Rail sheet (PSHEP3768FCZZ) Added rail sheet. Base line R Frame 0~0.5 Rail sheet (PSHEP3768FCZZ) Square hole Base line PWB Supporter Cassette rail As Rail sheet (PSHEP3768FCZZ) Base line 0~0.5 PWB Supporter Square hole PWB Supporter PWB Supporter A Rail sheet (PSHEP3768FCZZ) Base line Drawing seen from A Added attachment plate sheet. Paper feed side. Bound for EX 200 (SEC, SECL) Paper delivery side. 5 pcs. attached Paper feed side. Paper delivery side. Bound for EX 200 5 pcs. attached SEEG(BG), SUK, SCZ (GG) 3/6 6. Addition of a suction label to the suction lift arm of the front frame. Suction lift arm (MARMM0188FCZZ) Suction label (TLABZ3672FCZZ) 7. Change in parts and addition of parts in the finisher frame unit. Change in the F belt drive shaft (For Japan and 200V line only). Change in the FIN belt (For Japan and 200 V line only). Change in the delivery pulley. Change in the FIN drive belt. Change in the parallel pin. Addition of a washer. Discontinuance of the front and rear FIN GP pressure springs. Change in sheet B on the FIN PG. Sheet B on the FIN PG 8 Sheet B SEI on the FIN PG 8. Change in the IC (ROM) in the LCD control PWB for compatibility with the German display and resetting of the PWB. 9. Change in the screws in the DR cleaner unit. 10.Change in the fusing knob in the fusing unit. 11. Discontinuance of the dehumidifying heater switch in the rear frame (Japan only). 4/6 12.Addition of a static electricity prevention brush in the duplex unit. Static electricity prevention brush P/G 61 -11 Current parts Ref. No. Model name Version P/G No. Parts code 57 -20 57 2 All 57 -- NBLTH0210FCZZ -- New parts Parts code NBLTH0248FCZZ PSHEP3749FCZZ Price rank AN AF Parts name Effec- Intertive change | ||
File name ARE003.PDF Date : Apr. 21, 1995 DIGITAL COPIER : AR-5040 No. : ARE-003 1. 2. 3. 4. 5. STANDARDIZATION OF THE PARTS CODES FOR THE IC IN THE ICU PWB. PREVENTION OF NOISE IN THE SHIELD BOX. CORRECTION OF THE PARTS GUIDE. DISCONTINUANCE OF THE SHIELD MYLAR IN THE SHIELD BOX UNIT TO IMPROVE PRODUCTIVITY. PREVENTION OF UNCLEAN COPIES DUE TO THE CURLING OF THE REAR END OF THE COPY PAPER DURING DOUBLE SIDE COPY OPERATIONS. 6. IMPROVEMENT OF PUSHER OPERATIONS IN THE FINISHER UNIT. 1. Standardization of the parts codes for the IC in the ICU PWB. 1.Model name: AR-5040 2.General: An error for the parts codes of the IC (Silk No. IC 33) used in the ICU circuit board was found, listing two different model codes for the same part. To correct this error the parts codes have been standardized as described below. 3.Description: VHISN74LS19NVHISN74LS19NS These are the same IC, but the parts codes are listed as different models. The parts codes have been standardized and listed as: VHISN74LS19NS 4.Action: From 1995 February production. 2. Prevention of noise in the shield box. 1.Model name: AR-5040 (200 V line only) 2.General: A problem of abnormal noise occurred in the shield box unit. To alleviate this problem, a shield plate was added as shown in the figure for those units bound for areas supplied with the 200 V line. 1/5 Green C SHARP CORPORATION Reprography Division 3.Description: Chassis UN 200V line. Step screws. 200V Line shield box unit. Chassis step screws. Position Addition of Shield plate A. Screws are used in 6 locations to fix shield plate A to the shield box unit. 4.Action: From the start of 1994 November production. 3. Correction of the parts guide. 1.Model name: AR-5040 2.General: The harness attached to the optional PWB (SCSI PWB, WP PWB) was also listed in the machine unit itself, and the parts guide listing has therefore been corrected. 3.Description: Corrected (discontinued) parts and their locations. P/G No. 11 -38 DHAI-2363FCZZ P/G No. 35 -29 P/G No. 11 -39 DHAI-2386FCZZ 4.Action: From the start of mass production. 2/5 4. Discontinuance of the shield sheet in the shield box unit to improve productivity. 1.Model name: AR-5040 2.General: The shield sheet used in the shield box has been discontinued to improve productivity. 3.Action: From the start of 1995 February production. 5. Prevention of unclean copies due to the curling of the rear end of the copy paper during double side copy operations. 1.Model name: AR-5040 2.General: The measures described below have been carried out to prevent unclean copies due to the curling of the rear end of the copy paper during double copy operations. 3.Description: Teflon tape has been attached to the fixing unit thermostat attachment plate to prevent unclean copies. Thermostat addachment plate Teflon tape 4.Action: From the start of mass production. 6. Improvement of pusher operations in the finisher unit. 1.Model name: AR-5040 2.General: The measures described below have b | ||
File name ARE004.PDF Date : Aug. 21, 1995 DIGITAL COPIER : AR-5040 No. : ARE-004 1. CORRECTION OF PARTS CODE ERROR. 2. ADDITION OF A SHEET TO COVER THE ELEVATOR MOTOR TO PREVENT THE INFILTRATION OF FOREIGN MATTER. 1. Correction of parts code error. 1.Model name: AR-5040. 2.General: An error in a portion of the parts codes listed in the parts guide has been found, and correction of the error is requested. 3.Description: Parts guide No. 74 -28 Error LX-BZ0198FCZZ 1st mirror Adjusting screw Correction LX-BZ0108FCZZ Silicon blade screws 2. Addition of a sheet to cover the elevator motor to prevent the infiltration of foreign matter. 1.Model name: AR-5040. 2.General: There was a possibility of infiltration of foreign matter through the opening section above the staple tray in the finishing unit. If by chance metallic matter happens to infiltrate into the elevator motor there is a possibility that it may come in contact with the terminals of the motor. To alleviate this problem, a cover sheet has been attached to the elevator motor. 3.Action: From the start of 1995 May production. Motor cover sheet Elevator motor 1/2 Green C SHARP CORPORATION Reprography Division Current parts Ref. No. Model name Version P/G No. Parts code 74 -28 AR-5040 2 | ||
File name ARE006.PDF Date : Nov. 15, 1995 DIGITAL COPIER : AR-5040 No. : ARE-006 CHANGES AND ADDITIONS OF PARTS 1.Model name: AR-5040. 2.General: Changes and additions of parts have been carried on the machine listed above, and are hereby reported. 3.Description: (1) The metal pattern of the DSD collar (P/G 17 -52) used in the DV box unit is interchangeable with that of models SF-9400/8870/8800, and the parts code for models SF-9400/8870/8800 is printed on the side face. This is confusing however, and to alleviate the potential of problems due to confusion, the printing has been discontinued and the DSD collar for model AR-5040 is now marked with black to distinguish it. (As is listed in the parts guide, the parts code for model AR-5040 is different from the parts code for models SF-9400/8870/8800.) (2) The black electro deposition used for the surface finishing of the CCD cover of the scanner unit has been changed to black galvanization in order to decrease the noise from the power supply. In addition to the changes described above, the lower face of the cover in the 200V line has been extended to prevent noise from being emitted from the lower face. This new CCD cover is to be used in the machines of the 200V line. 200 V series Lengthened From the start of 1994 October production. 1/7 Green C SHARP CORPORATION Reprography Division (3) An ICB and capacitor has been added to the ICU PWB accommodate the special photographic mode. The following parts codes of the ICU PWB have also been changed in accordance with these changes. Added parts VCKYTVIEF104Z (capacitor)added location C105 . C106 VHI74F00SJ/-1 (IC) added location IC70 VHI74F74SJ/-1 (IC) added location IC71 From the start of 1994 December production. (Temporary measures have been carried out since the start of mass production.). (4) A ferrite core has been added to the CL lead wire as a measure to improve noise (only for models of the 200 V series). Section wound with tape Ferrite core (RCORF0012FCZZ) CL Lead wire (DHAI-2344FCZZ) From the start of 1994 October production. (5) There was a danger of the rear end of the copy paper getting caught on the upper ST sheet in the staple unit of the 100 V series. To alleviate this problem, the ST sheet has been changed to the one used in the 200 V series. From the start of 1994 December production. (6) There was a mistake in the parts code listed in the parts guide for the AC cord holder. Correction of the error as described below is requested (only for machines bound for SEEG, UK and Australia). LFIX-0084FCZZ (Mistaken) LFIX-0016FCZZ. (Corrected) 2/7 (7) An ground wire has been added in the operation panel (LCD PWB FG) as a measure to improve noise. (This measure has been carried out only on the 200 V line.) LCD PWB FG Lower LCD case surface Main SW OPE LCD PWB FG Fixing plate From the start of 1994 October production. (8) The parts additions and discontinuances listed below have been carried out since the start of mass production after t | ||
File name ARE007.PDF Date : Apr. 16, 1996 DIGITAL COPIER : AR-5040 No. : ARE-007 CHANGES AND ADDITIONS OF PARTS. 1.Model name: AR-5040 2.General: Parts changes and additions have been carried out on the models listed above, and are hereby reported. 3.Description: Price rank Effec- Intertive changetime ability Version P/G No. Old parts code New parts code Parts name Reason for changes 46 -15 46 -16 All 46 -14 46 46 -901 49 -52 49 -53 PGIDH0947FCZZ PSHEP1930FCZZ PSHEP1968FCZZ -- CCASZ0269FC51 PSHEZ3734FCZZ Discontinuance -- PSHEP3735FCZZ CGIDH1598FC01 CCASZ0269FC52 AS BF Discontinuance -- TC Guide TC Guide mylar TC sheet TC front PG SE AS TC-AC case unit N ST cover sheet ST cover sheet 200 ST cover sheet SEI Washers FG mesh lines See text 1st lot `95/2 3 Carried out in accordance with a request from EMI. Carried out as an improvement measure for drive load changes. Carried out as an improvement measure for curling during double-side copy operations. 1st lot AA Screws Changes have been carried out on only the four attachment screws of the transport guide support plate. Carried out as improvement measure for noise. (100V series : 1, 200V series : 2) 1st lot `95/2 6 4 -- Carried out as an improvement measure for problems of copy misalignment. 200V series 1st lot `94/10 -- Carried out as an improvement measure for paper delivery performance. PSHEZ3911FCZZ 49 -- LX-WZ0131FCZZ 4 All 33 -26 NBLTH0242FCZZ MSPRC1283FCZZ (Q`ty: 2) LX-BZ0689FCZZ (Q`ty: 4) NBLTH0262FCZZ MSPRT2291FCZZ (Q`ty: 2) LX-BZ0465FCZZ (Q`ty: 4) -- QCNW-0145FCZZ AK AA AN AQ Drum belt Japan 20 -18 AE Pressure spring 15 -26 All 48 QSLP-0182FCZZ -- PTPE-0215FCZZ AS Fin finger Electric insulation tape 1st lot `94/10 AN 1/3 Green C SHARP CORPORATION Reprography Division Version P/G No. Old parts code New parts code Price rank Parts name Effec- Intertive changetime ability Reason for changes SEC SECL SEEG SUK SCA 1 -- PSHEP3877FCZZ AD Service warning label 1st lot `95/1 -- Carried out as an improvement measure to prevent the service warning label from peeling. 2 -24 33 -29 2 -23 CBTN-0157FC31 PCLR-0367FCZZ CBTN-0158FC03 CBTN-0157FC32 Q`ty 42 CBTN-0206FC03 AH -- AP Copy key unit Pulley collar Tenkey N AS Clear all keys N AS See text -- 1st lot `94/10 3 Carried out as an improvement measure to prevent the letters from disappearing. Carried out as an improvement measure to prevent the letters from disappearing. 2 -25 CBTN-0147FC02 CBTN-0208FC02 AN 1st lot `95/5 12 All 47 -15 55 -1 71 -102 71 -36 -- 71 VRD-HT2EY1R6J AA Resister 1st lot `95/7 1st lot `95/3 3 14 -10 DHAI-2357FCZZ DHAI-2357FC11 BM ECL flat cable 200V HP sensor harness Micro swith for door Left exterior lower PS clutch Washer AA -- PRNGP0019FCZZ MSPRC2351FCZZ 8 -6 8 8 -4 200V series 8 MLEVF0663FCZZ -- PGIDH1533FCZZ MLEVP0665FCZZ LX-NZ1019HCZZ PGIDH1533FCZ1 MSPRP1050FCZ1 AG AL AA AZ AC G grip Brake spring Fusing switch lever Push nut Paper guide A Copy grounding plate band Upper sheet for the pap | ||
File name ARE008.PDF Date : Apr. 10, 1996 DIGITAL COPIER : AR-5040 No. : ARE-008 CHANGES AND ADDITIONS OF PARTS. 1.Model name: AR-5040 2.General: Parts changes and additions have been carried out on the models listed above, and are hereby reported. Price rank Effec- Intertive changetime ability Version P/G No. Old parts code New parts code Parts name Reason for changes 57 -13 NPLYZ0183FCZZ LPINS0096FCZZ LX-WZ0011FCZZ NPLYZ0087FCZZ LPINS0155FCZZ Discontinuance MSPRC2124FCZZ AB AA -- AC Paper discharge pulley (large) Pin Washer FIN paper guide spring F FIN paper guide spring R Sheet 1st lot `95/4 1 MSPRC2125FCZZ All 57 -- PSHEP3618FCZZ (Q`ty: 2) AD Carried out as a measure to improve the stacking performance of the finisher. -- AA LX-WZ0017FCZZ (Q`ty: 2) PSHEP3850FCZZ (Q`ty: 2) -- Discontinuance -- Washer FIN paper guide upper B sheet B FIN paper guide upper B sheet C LED 1st lot `95/7 1 Carried out as an improvement measure to prevent the LED from becoming misaligned. Carried out as an improvement measure to conform with CE mark standards. Carried out as a change in materials. Carried out as an improvement measure to prevent the timing belt from slipping off. Carried out as an improvement measure to prevent jams from occurring. PSHEP4030FCZZ AE 69 -4 SEEG UK VHIPGL8KG21T-1 VHPGL8EG22/-1 AB 74 -- TCADZ1224FCZZ AD CE mark pin Open upper guide Flange -- 59 -14 All 60 0CW4053P117D/ 0CW4053P117E/ 0CW4053P348A/ (Q`ty: 2) 0CW4053P345B/ BU 1 1st lot `95/9 1st lot `95/7 -- AG -- Overseas 21 0CW4053P345A/ AK Guide mylar C 3 SHARP CORPORATION Reprography Division Green C | ||
File name ARE010.PDF Date : Mar. 28, 1996 DIGITAL COPIER : AR-5040 No. : ARE-010 REGARDING 500 CASSETTE PAPER FEEDING UNIT USE AND THE PERIOD FOR CHANGING THE ROLLERS 1.Model Name: AR-5040 2.General: We are changing the 500 cassette paper feeding unit used by the above models to that of the SF-2025/2030/2040, so that the two units now use the same unit. For more details, please see the appended sheet. When parts of the old unit are changed, new parts will have to be used, so we request that you change and add the necessary new parts all at once. The paper feeding roller, reverse roller, and drawing roller for the SF-2025/2030/2040's paper feeding unit are listed in the service manual as requiring changing when made 80K or after 2 years. This note is not included in the service manuals for the models listed above, but we ask that you change the parts when the unit is made 80K or after two years as listed above. 3.Description: Old New NROLR1114FCZZ NROLR1049FCZZ NROLR1093FCZZ NBRGP0549FCZZ NBRGP0550FCZZ MSPRC2382FCZZ LSTPP0321FCZZ (Added) 11 12 Pickup roller Paper feeding roller Roller PF bearing Bearing Torque limiter spring Pickup roller gear 18T NROLR0920FCZZ NROLR0901FCZZ NROLR0902FCZZ NBRGC0167FCZZ NBRGC0457FCZZ MSPRC1969FCZZ NGERH0863FCZZ (1 Location discontinued) NGERH0861FCZZ (1 Location discontinued) CLEVP0587FC01 MSPRC0167FCZ2 -- PCLR-0373FCZZ Paper feeding roller gear 18T Roller lever Roller lever spring Screws (M3 x 8) Collar NBRGC0559FCZZ (Added) MLEVP0691FCZZ MSPRC2383FCZZ XEBSD30P08000 (Added) PCLR-0373FCBZ 1/3 Green C SHARP CORPORATION Reprography Division For a detailed diagram of the unit used after the change see the SF-2025/2030/2040's part guide. Discontinued 4.Action: From the first unit of March, 1996 production on. 2/3 Current parts Ref. No. Model name Version P/G No. Parts code 41 -4 41 -9 41 -37 41 -26 41 -28 41 -40 AR-5040 All NROLR0920FCZZ NROLR0901FCZZ NROLR0902FCZZ NBRGC0167FCZZ NBRGC0457FCZZ MSPRC1969FCZZ New parts Parts code NROLR1114FCZZ NROLR1049FCZZ NROLR1093FCZZ NBRGP0549FCZZ AC NBRGP0550FCZZ MSPRC2382FCZZ DX Price rank AL AT AN Parts name Effec- Intertive changetime ability Note 11 Pick up roller Paper feeding roller Roller PF Bearing Bearing Torque limiter spring Roller stopper 1st lot '96/3 Q'ty: 2 5 41 -5 NGERH0863FCZZ LSTPP0321FCZZ (1 Location discontinued) (Added) AC NGERH0861FCZZ NBRGC0559FCZZ (1 Location discontinued) (Added) CLEVP0587FC01 MSPRC0167FCZ2 -- PCLR-0373FCZZ MLEVP0691FCZZ MSPRC2383FCZZ XEBSD30P08000 PCLR-0373FCBZ AD AC AA DD 41 -11 41 -35 41 -36 41 41 -42 Bearing Roller lever Roller lever spring Screw (M3X8) Collar 500 Cassette paper feeding unit Q'ty: 2 12 41 -901 | ||
File name ARE011.PDF Date : May. 14, 1996 COPIER : AR-5040 No. : ARE-011 (Service Information) ABOUT HANDLING THE DIP SW 1.Model Name: AR-5040 2.General: We are adding instructions on making adjustments to the above models, and also changing the handling procedures for the DIP SW of the RADF control PWB as indicated below. AR-5040 General view of the control PWB OFF ROM ON DIP SW CPU PUSH SW General view of the DIP switch SW No.1 2 3 4 5 1/2 Green C SHARP CORPORATION Reprography Division Adjust ments to the ADF Please carry out the following three adjustments whenever changing any of the RADF/ADF sensors. No. 1 2 3 Adjustment Initializing the E2PROM Adjusting each sensor Original halt position adjustment Part adjusted Adjustment in ADF unit mode Adjustment in ADF unit mode Adjustment using Sim. 53 of the copier unit ADF unit mode (E2PROM/sensor) adjustment procedure Before making adjustments... Open the ADF back side maintenance cover. Turn the copier off DIP SW settings While pressing on the switch (Push SW) above the ADF PWB, turn the copier on. (Keep the switch on for at least one second.) Adjustment E2 PROM initialization DIP SW setting 1 2 3 4 5 ON OFF 1 2 3 4 5 Model name AR-5040 Set the DIP SW See the DIP SW setting chart to the right. Sensor adjustment ON OFF AR-5040 * All sensor adjustments for the AR5040 should follow the above chart. Open and close the paper supply or paper discharge cover. (Opening and closing the ADF also works.) AR-5040 1: *Note there are no problems, LED 1 on the PWB When flashes. When there is a problem with the sensor, LEDs 3 or 4 flash. If this occurs, check each sensor for trouble. Push SW ON AR-5040 No * 1 The LED above the PWB flashes Yes Make any other necessary adjustments Yes Turn off all the push SWs. Turn the copier off. 2/2 That completes the procedure | ||
File name ARE012.PDF Date : Jul. 30, 1996 DIGITAL COPIER : AR-5040 No. : ARE-012 CHANGES AND ADDITIONS TO PARTS. 1.Model Name: AR-5040 2.General: We have made changes and additions to parts of the above model. Current parts Ref. No. Model name Version P/G No. Parts code 10 -15 1 AR-5040 All 39 -901 DUNTM6554FC11 New parts Parts code Price rank Parts name Effec- Intertive changetime ability Reasons for changes DUNTM6785FCZZ BE Lift up unit 1st lot '96/2 1 In order to improve productivity, we are making the part the same as that for the SF-2025/2030/2040. Due to improvements in the harness attachment, we are adding this to the drive joint plate (P/G 10 -6 ). 2 AR-5040 All 10 -- LHLDW6655RCZZ AB Cable holder 1st lot '96/1 6 SHARP CORPORATION Reprography Division Green C | ||
File name ARE013.PDF Date : Oct. 22, 1996 DIGITAL COPIER : AR-5040 No. : ARE-013 THE ADDITION OF A SEPARATOR PAWL SPACER TO THE DRUM CLEANER UNIT. 1.Model Name: AR-5040 2.General: The separator pawl in the drum cleaner unit does not always detach from the drum. To prevent this problem, we have made the changes described below. 3.Description: Please attach a separation pawl spacer to the cleaner unit as indicated below. Separation pawl spacer 4.Action: From the first unit of May, 1996 production. Current parts Ref. No. Model name Version P/G No. Parts code New parts Parts code Price rank AC Parts name Effec- Intertive changetime ability 1st lot '96/5 Note 1 AR-5040 All 18 -- PSPAZ0704FCZZ Separation pawl spacer 6 | ||
File name ARE014.PDF Date : Nov. 5, 1996 DIGITAL COPIER : AR-5040 No. : ARE-014 CHANGE IN THE ROLLER FRAME IN THE FINISHER ELEVATOR FRAME UNIT. 1.Model Name: AR-5040 2.General: There was a danger of the sensor and the roller frame F in the finisher elevator frame unit coming in contact with each other. To alleviate this problem the roller frame F has been changed into one that is divided into two parts. (Old) Roller frame F Changed CFRM-0781FC01 CFRM-0781FC02 LPLTM5319FCZZ XBBSD30P08000 Q'ty: 1 Q'ty: 1 Q'ty: 1(added) Q'ty: 2(added) (New) Roller frame F Sensor light shield plate M3 x 8 (Assembly procedure) Changed Roller frame F CFRM-0781FC02 Sensor light shield plate LPLTM5319FCZZ The screw should be driven so that the sensor light shield plate is positioned in the center portion of the sensor detection area. Roller frame F CFRM-0781FC01 sc scr rew ew M When fixing the screws, 3× the screw lock should be applied. Q'ty: 8bin 2 d 3.Action: From 1996 August production. 1/2 Green C SHARP CORPORATION Reprography Division Current parts Ref. No. Model name Version P/G No. Parts code 52 -32 AR-5040 All 52 -- CFRM-0781FC01 New parts Parts code CFRM-0781FC02 LPLTM5319FCZZ XBBSD30P08000 Price rank AR AD AA Parts name Effec- Intertive changetime ability Note Roller frame F Sensor light shield plate Screw (M3 x 8) 1st lot '96/8 3 | ||
File name ARE016.PDF Date : Nov. 28, 1996 COPIER : AR-5040 No. : ARE-016 1.MEASURE TO ALLEVIATE PROBLEMS OF DIAGONAL FEEDING FROM THE UPPER PAPER CASSETTE. 2.CHANGE IN THE MANUAL PAPER FEEDING LEVER IN THE MANUAL MULTI PAPER FEEDING UNIT AS A MEASURE TO IMPROVE PRODUCTIVITY. 1. Measure to alleviate problems of diagonal feeding from the upper paper cassette. 1.Model Name: AR-5040 2.General: A change has been carried out in the shape of a portion of the U-turn paper guide in the transport unit. In accordance with this change, a change has been carried out in the part code. These changes have been carried out as a measure to alleviate problems of diagonal feeding from the upper paper cassette. 3.Action: Japanese production: Chinese (SOCC) production: Running change from 1996 mid-July production. Running change from 1996 mid-October production. 2. Change in the manual paper feeding lever in the manual multi paper feeding unit as a measure to improve productivity. 1.Model Name: AR-5040 2.General: A change has been carried out in the maker of some of the parts used in the manual multi paper feeding unit due to discontinued production of the parts. This change has been carried out as a measure to improve productivity. Please refer to the parts list for details concerning this change. 3.Action: From the start of 1996 October production. 1/2 Green C SHARP CORPORATION Reprography Division Current parts Ref. No. Model name Version P/G No. Parts code 24 -15 1 25 -14 AR-5040 2 All 42 -8 42 -5 42 -6 | ||
File name ARE017.PDF Date : Mar. 5, 1997 DIGITAL COPIER : AR-5040 No. : ARE-017 CHANGE IN THE ORIGINAL COPY DETECTION SHIELD OF THE OPTICAL UNIT CARRIED OUT AS A MEASURE TO IMPROVE PRODUCTIVITY. 1.Model Name: AR-5040 2.General: A change has been carried out in the shape of the original copy detection shield in the optical unit of the models listed above. This change has been carried out as a measure to improve productivity. In accordance with this change, the shield sheet has been discontinued. 3.Description: Original copy shield sheet Original copy shield PSHEP3915FCZZ PSLDH0170FCZZ Discontinued PSLDH0178FCZZ 4.Action: From 1996 November production. Current parts Ref. No. Model name Version P/G No. Parts code 3 -8 1 AR-5040 All 3 | ||
File name ARE028.PDF Date : Jun. 13, 1997 DIGITAL COPIER : AR-5132 No. : ARE-028 CHANGE IN THE BEARING OF THE CASSETTE RAIL CARRIED OUT AS A MEASURE TO IMPROVE PRODUCTIVITY . 1.Model Name: AR-5132 2.General: Achange has been carried out in the maker of the cassette rail caulked bearing of the cassette rail L/R in the cassette unit. This change has been carried out as a measure to improve productivity. 3.Action: From 1997 April production. Current parts Ref. No. Model name Version P/G No. Parts code 30 -16 CRALM0110FC01 48 -27 AR-5132 Overseas 30 -7 CRALM0111FC01 48 -7 | ||
File name ARE041.PDF Date : Jun. 26, 1997 DIGITAL COPIER : AR-5040 No. : ARE-041 [Service Information] ESTABLISHMENT OF SCANNER UNIT AS ASERVICE PART. 1.Model Name: AR-5040 2.General: The lens base unit and the scanner base unit had been established as separate service parts, but adjustment operations are very difficult when the two parts have been assembled in the markets. As a measure to alleviate this problem and improve service conditions, the combination of these two parts into a single unit has been carried out and the new single unit has been established as the scanner unit. 3.Description: A Lens base unit: CDAIU0498FC51 (P/G 12 -501) B Scanner base unit: CDAIU0490FC51 (P/G 12 -502) A + B = Scanner unit: DUNT-6719FC30 (for the 100 V series) DUNT-6719FC31 (for the 200 V series) Current parts Ref. No. Model name Version P/G No. Parts code 100V Series AR-5040 200V Series | ||
File name ARE043.PDF Date : Jul. 7, 1997 DIGITAL COPIER : AR-5132 No. : ARE-043 1. MEASURE TO ALLEVIA PROBLEMS OF ELECTRICAL TE NOISE. 2. MEASURE TO ALLEVIA PROBLEMS OF JAMS WHICH TE OCCUR BEFORE THE FUSING PROCESS. 1. Measure to alleviate problems of electrical noise. 1.Model Name: AR-5132 (Only for machines bound for the destinations of the 200 V series). 2.General: The changes and additions of the parts listed below have been carried out as a measure to alleviate problems of electrical noise in machines bound for destinations of the 200 V series. 3.Description: <1> Agrounding plate right has been attached to the left side of the rear frame. M3 screw type speed nut ø2 hole M3 × 6 bind taping, 2 types Abnormally shaped hole Rear frame left side Corner Screw tip standard B' Square hole Grounding plate right M4 screw type speed nut ø5 hole M4 × 6 bind taping, 2 types Dimple 1/3 Green C SHARP CORPORATION Reprography Division <2> Agrounding plate left has been attached to the fusing drawer attachment plate (P/G [10]-29) with fixing tape. Fusing drawer attachment plate Grounding plate left fixing tape <3> Achange has been carried out in the ICU PWB cover, and the grounding plate left has been attached. Grounding plate left Fusing drawer attachment plate 4.Action: From the start of mass production. 2/3 2. Measure to alleviate problems of jams which occur before the fusing process. 1.Model Name: AR-5132 (Only for machines bound for the destinations of the 200 V series). 2.General: There have been problems with jams occurring during back side copy operations of A3 sized copy paper, caused by the copy paper getting caught on the fusing upper guide due to curling of the right edge of the copy paper. 3.Description: Achange has been carried out in the angle of the bent section of the metal plate of the fusing guide cover, and a fusing guide sheet has been added. This measure has been carried out to help the copy paper move more smoothly through the machine. Fusing guide cover Fusing upper guide Fusing guide sheet PC-EX 4.Action: From the start of 1997 March production. Current parts Ref. No. Model name Version P/G No. Parts code Parts code LPLTM5352FCZZ 1 (1) 9 ---XUBSD30P06000 1 (2) 1 (3) 200V series 10 12 -14 12 16 -17 2 16 | ||
File name ARE044.PDF Date : Jul. 1, 1997 DIGITAL COPIER : AR-5040 No. : ARE-044 1.MEASURE TO PREVENT THE CL LEAD WIRE FROM LIFTING UP . 2.MEASURE TO PREVENT CONTACT WITH THE HOME POSITION SENSOR DETECTION PLA IN THE SCANNER UNIT. TE 1. Measure to prevent the CL lead wire from lifting up. 1.Model Name: AR-5040 2.General: ACL lead wire cover has been added as a measure to prevent the CL lead wire from rising up. CL Lead wire cover Insert into the screw hole Tighten together with the step screw 3.Action: From the start of 1997 April production. 2. Measure to prevent contact with the home position sensor detection plate in the scanner unit. 1.Model Name: AR-5040 2.General: The ground wire from the ORS illumination PWB is fixed to the optical plate, but the fixing screws were too long, creating the possibility of contact between the ground wire fixing screw and the detection plate of the home position sensor occurring during scanner unit operations. As a measure to alleviate this problem, sufficient space has been secured by changing the fixing screws of the ground wire to shorter screws. 3.Action: From the start of 1997 May production. 1/2 Green C SHARP CORPORATION Reprography Division Current parts Ref. No. Model name Version P/G No. Parts code New parts Parts code Price rank AF Parts name Effec- Intertive changetime ability 1st lot '97/4 6 1st lot '97/5 Note 1 AR-5040 2 | ||
File name ARE045.PDF Date : Jul. 10, 1997 DIGITAL COPIER : AR-5132 No. : ARE-045 [Service Information] CHANGE IN THE CPU OF THE MIRROR MOTOR CARRIED OUT AS A MEASURE TO IMPROVE PRODUCTIVITY . 1.Model Name: AR-5132 2.General: The CPU of the mirror motor (P/G 4 -28) has been changed from a one time type to a mask type. This change has been carried out as a measure to improve productivity. Furthermore, in accordance with this change the CPU socket has been discontinued. Note: The old part and the new part are interchangeable, and therefore no change has been carried out in the part code. 3.Action: From 1997 June production. SHARP CORPORATION Reprography Division Green C | ||
File name ARE046.PDF Date : Aug. 1, 1997 DIGITAL COPIER : AR-5132 No. : ARE-046 1. MEASURE CARRIED OUT TO ALLEVIA PROBLEMS OF ELECTRICAL NOISE. TE 2. MEASURE CARRIED OUT TO STABILIZE THE RETURN OF THE PPD1 ACTUA AND TOR MEASURE CARRIED OUT TO ALLEVIA PROBLEMS OF ABNORMAL NOISE WHICH HAD TE BEEN OCCURRING DURING PAPER FEEDING OPERA TIONS. 3. MEASURE CARRIED OUT TO ALLEVIA PROBLEMS OF JAMS IN THE U-TURN PAPER TE GUIDE SECTION. 1. Measure carried out to alleviate problems of electrical noise. 1.Model Name: AR-5132 (for machines bound for the U.K., Germany, Europe, and Australia markets). 2.General: The addition of a mesh harness has been carried out to the rear side of the ADU unit. This change has been carried out as a measure to alleviate problems of electrical noise. ADU unit rear side Mesh harness 3.Action: From the 1st lot of 1997 February production. 2. Measure carried out to stabilize the return of the PPD1 actuator and measure carried out to alleviate problems of abnormal noise which had been occurring during paper feeding operations. 1.Model Name: AR-5132 2.General: <1> There had been problems of abnormal noise in the transport DV guide section which occurred during copy paper feeding operations. As a measure to alleviate these problems, the diameter of the transport roller was changed from ø18 to ø18.5. This change was carried out as a measure to decrease the abnormal noise. <2> Achange has been carried out in the load of the spring of the PPD1 actuator. The load has been changed from 10g to 1 This change has been carried out 1g. as a measure to stabilize the return of the PPD1 actuator. 3.Action: <1> From the 1st lot of 1997 March production. <2> From 1997 mid-May production. 1/2 Green C SHARP CORPORATION Reprography Division 3. Measure carried out to alleviate problems of jams in the U-turn paper guide section. 1.Model Name: AR-5132 2.General: There was a possibility of jams occurring in the U-turn paper guide of the transport unit when copies were delivered from the ADU during double-side copy mode operations. As a measure to alleviate this problem, the measure described below has been carried out. 3.Description: Achange in the thickness of the abnormal noise prevention sheet which is attached to the U-turn paper guide has been carried out. The thickness of the abnormal noise prevention sheet has been changed from t= 0.25 to t=0.125. U-turn P/G sheet R (PSHEP4500FCZ1) U-turn P/G sheet F (PSHEP4499FCZ1) Edge of double sided tape aligned with the standard. U-turn P/G sheet R U-turn P/G sheet F 4.Action: From 1997 mid-May production. R side Current parts Ref. No. Model name Version P/G No. Parts code U.K. Germany Europe Australia Plate spring F side Effec- Intertive changeability time New parts Parts code Price rank Parts name Note 1 33 ---- DHAI-2805FCZZ AG Mesh harness 1st lot '97/2 6 2 (1) 2 (2) AR-5132 All 20 -48 CROLR0897FC02 CROLR0897FC03 AV Transport roller 1st lot '97/3 3 Mid'97/5 20 -46 MSPRT1561FC | ||
File name ARE047.PDF Date : Aug. 1, 1997 DIGITAL COPIER : AR-5040 No. : ARE-047 1.CHANGES CARRIED OUT IN THE FINISHING UNIT AS A MEASURE TO IMPROVE PRODUCTIVITY . 2.CORRECTION CARRIED OUT IN THE PARTS GUIDE. 1. Changes carried out in the finishing unit as a measure to improve productivity. 1.Model Name: AR-5040 2.General: Achange has been carried out in the materials used for some of the parts used in the finisher unit. These changes have been carried out as a measure to improve productivity. Please refer to the parts list for details concerning the parts in which changes were carried out, and their part codes. 3.Action: From the 1st lot of 1997 July production. 2. Correction carried out in the parts guide. 1.Model Name: AR-5040 2.General: Achange has been carried out in some of the screws in certain locations since the 1st lot of mass production. In accordance with this change a correction was necessary in the parts guide and has therefore been carried out. Two grounding terminals are secured by one screw. The circled section indicates the screws in which the change was carried out. 1/2 Green C SHARP CORPORATION Reprography Division Current parts Ref. No. Model name Version P/G No. Parts code 51 -9 51 -11 51 -96 53 -45 51 -51 51 -44 51 -27 1 AR-5040 All 52 -41 52 -38 52 -36 52 -32 52 -37 51 -61 48 -19 48 -20 4 -62 2 1 -7 | ||
File name ARE048.PDF Date : Aug. 22, 1997 DIGITAL COPIER : AR-5132 No. : ARE-048 [Service Information] CORRECTIONS CARRIED OUT IN THE PARTS GUIDE OF MODELAR5132. 1.Model Name: AR-5132 2.General: There were some errors discovered in the parts guides for the models listed above. The parts guide errors have been corrected, and are hereby reported. 3.Description: 1 Exteriors Current parts Version P/G No. Parts code U.S.A. 1 ---Parts code PSHEP4498FCZZ New parts Price rank AC Parts name FDA Protect sheet FDA Protect sheet 1/2 Green C SHARP CORPORATION Reprography Division 7 Front frame left Current parts Version P/G No. Parts code 200V series 7 -6 7 -28 7 PFILZ0191FCZZ CFILZ0260FC01 PSHEP3950FCZZ CFILZ0261FC01 AU Ozone filter ER Ozone filter EF Parts code New parts Price rank Parts name Added ozone filter ER Ozone filter EF 14 Toner hopper section Current parts Version P/G No. Parts code All 14 ---Parts code PMLT-1129FCZZ New parts Price rank AC Parts name Hopper seal B Added hopper seal B 2/2 | ||
File name ARE049.PDF Date : Aug. 22, 1997 DIGITAL COPIER : AR-5132 No. : ARE-049 [Service Information] CHANGE IN AUD INTERF ACE HARNESS WIRING. 1.Model Name: AR-5132 2.General: Because the 2P connector harness for the AUD interface harness counter in the control panel unit is too long, it may get caught when the cabinet is being put on during repair. Therefore the changes below have been made to the wiring method. LCD control PWB White AUD interface harness DHAI-2530FCZZ Red Wire so it catches on the boss. Door SW OP PWB Panel side To OPC PWB Fastening band As shown in the diagram above, bend connector C away from fastening band "a", and fasten the harness for connectors B & C 40mm from fastening band a with "a" fastening band. 3.Action: From the 1st lot of 1997 July production. 1/2 Green C SHARP CORPORATION Reprography Division Current parts Ref. No. Model name Version P/G No. Parts code LBNDJ0013FCZZ (Q'ty: 2) New parts Parts code Q'ty change: 2 3 Price rank AA Parts name Effec- Intertive changetime ability 1st lot '97/7 Note AR-5132 All 2 Fastening band ---- | ||
File name ARE050.PDF Date : Dec. 1, 1997 DIGITAL COPIER : AR-5132 No. : ARE-050 1.ACHANGE TO THE LOWER SUCTION PLA MA TE TERIAL. 2.ACHANGE TO THE SHAPE OF THE BRAKE SPRING IN THE 500 TRA Y PAPER SUPPLY UNIT. 1. Achange to the lower suction plate material. 1.Model Name: AR-5132 2.General: In order to increase productivity, we have changed the material used in the transport DV guide unit's lower suction plate to a recycled material. 3.Action: From the 1st lot of August, 1997 production on. 1/2 Green C SHARP CORPORATION Reprography Division 2. Achange to the shape of the brake spring in the 500 tray paper supply unit. 1.Model Name: AR-5132 2.General: In order to improve productivity, we have changed the shape of the brake spring in the 500 tray paper supply unit. 3.Action: From the middle of August, 1997 production (running change). Current parts Ref. No. Model name Version P/G No. Parts code New parts Parts code Price rank AL Parts name Effec- Intertive changeability time 1st lot '97/8 1 Mid'97/8 Note 1 AR-5132 2 | ||
File name ARE051.PDF Date : Sep. 12, 1997 DIGITAL COPIER : AR-5132 No. : ARE-051 ABOUT ESTABLISHING REGIMYLAR AS ASERVICE PART. 1.Model Name: AR-5132 2.General: We have established the regimylar attached to the desk's paper guide E as a service part. Regimylar 0CW4067P030// * Regimylar was added to all the mass-produced units from the first one on, and has now been established as a service part. Current parts Ref. No. Model name Version P/G No. Parts code All 42 ---Parts code 0CW4067P030// New parts Price rank AP Parts name Effec- Intertive changetime ability ------- Note AR-5132 Regimylar | ||
File name ARE052.PDF Date : Oct. 1, 1997 DIGITAL COPIER : AR-5132 No. : ARE-052 CHANGE IN THE IC (SRAM) CARRIED OUT AS A MEASURE TO IMPROVE PRODUCTIVITY. 1.Model Name: AR-5132 2.General: The IC(SRAM) used in the ICU PWB has been changed to improve productivity. 3.Action: From the start of 1997 August production. Current parts Ref. No. Model name Version P/G No. Parts code New parts Parts code Price rank AY Parts name Effec- Intertive changeability time 1st lot '97/8 Note AR-5132 All 51 -60 VHI7C185-25VC VHIH256-20-8A IC [IC725,744] 1 | ||
File name ARE053.PDF Date : Oct. 2, 1997 DIGITAL COPIER : AR-5040 No. : ARE-053 [Service Information] MEASURE TO ESTABLISH COMPLIANCE WITH THE CE STANDARDS FOR THE DC POWER SUPPLY PWB. 1.Model Name: AR-5040 (only for machines bound for the 200 V market destinations.) 2.General: The addition of a harness has been carried out on the DC power supply PWB. The addition of the harness has been carried out as a measure to comply with the CE standards (noise standards). The harness connects with the parts on the machines side which comply with CE standards, but the parts in the machine which comply with the CE standards are a little late, and the harness cannot be used during this period. (Due to the ordering status of the DC power supply PWB, the measures carried out on the machine itself will have been carried out first.) The old PWB and the new PWB are interchangeable until the CE compliance measures have been carried out on the machine. Harness in compliance with the CE standards New parts Parts code Price rank Parts name 3.Action: From 1997 August production. Current parts Ref. No. Model name Version P/G No. Parts code 35 -22 AR-5040 200V series 73 -901 | ||
File name ARE055.PDF Date Dec. 5, 1997 Digital copier AR-5132 No. ARE-055 [Service Information] Change of parts in the optical unit (productivity improvement) 1.Model Name: AR-5132 2.General Productivity is improved by changing the material, surface treatment method and so on for some parts in the optical unit. 3.Description: Change of shape of OC fixing plate 4.Action From the middle of production of July, 1997 (floating switch on the way of production) Ref. No. Model name Current parts Version P/G No. Parts code All 4 -79 LPLTM4997FCZ1 New parts Parts code LPLTM4997FCZ2 Price rank AP Parts name OC FIXING PLATE S Effec- Intertive change- Note ability time Mid'97/7 1 AR-5132 | ||
File name ARE056.PDF Date : Oct. 23, 1997 DIGITAL COPIER : AR-5132 No. : ARE-056 [Service Information] CORRECTION CARRIED OUT IN THE PARTS GUIDE FOR MODELAR-5132. AR-5132 1.Model Name: 2.General: There was a mistake that was found in the parts guide for model AR-5132. The mistake has been corrected. 3.Description: The parts for [52] PCU PWB listed below were mistakenly left out of the parts guide for model AR-5132, and have therefore been added. Current parts Ref. No. Model name Version P/G No. Parts code New parts Parts code Price rank BE Parts name Effec- Intertive changeability time Note AR-5132 All 52 ---- VHIHD8-570L04 IC (HD8-570L04) 1st lot [IC 106] 6 | ||
File name ARE057.PDF Date : Oct. 24, 1997 DIGITAL COPIER : AR-5040 No. : ARE-057 REGARDING CHANGES TO THE DEVELOPER UNIT'S INTERNAL DV COVER U. 1.Model Name: AR-5040 2.General: In order to increase part interchangeability between different models, we have changed the shape of the developer unit's internal DV cover u. Changed thickness from 3.0 mm to 2.5 mm. 3.Action: From the first unit of September, 1997 production on. Current parts Ref. No. Model name Version P/G No. Parts code Parts code New parts Price rank AL Parts name Effec- Intertive changetime ability 1st lot '97/9 Note AR-5040 All 17 -71 PCOVP0799FCZZ PCOVP0799FCZ1 DV cover U 1 | ||
File name ARE058.PDF Date : Oct. 30, 1997 DIGITAL COPIER : AR-5132 No. : ARE-058 1.PREVENTING PAPER JAMS A THE DESK'S 500 SHEET CASSETTE. T 2.ACHANGE TO THE OPERA TION CONTROL PWB (FOR IMPROVED PRODUCTIVITY). 1. Preventing paper jams at the desk's 500 sheet cassette. 1.Model Name: AR-5132 2.General: In order to prevent jams that may occur when the desk's 500 cassette is using A4 or letter size paper, we have made the following changes. 3.Description: We have changed the desk control PWB's ROM software so that the PWB does not check for TRC signals within 300 msec of the paper supply signal, since mistaken TRC signal detection is the cause of many paper jams. (Changing the ROM on an old PWB makes it equivalent to a new PWB.) Furthermore, we have established a new PWB for Europe in order to comply with CE mark regulations. 4.Action: From the first unit of September, 1997 production on. 2. Achange to the operation control PWB (For improved productivity). 1.Model Name: AR-5132 2.General: In order to improve productivity during assembly of the operation control PWB, we have changed the PWB pattern. The old and new boards are interchangeable, and there is no change in the positioning of the board during assembly, so the part code has not changed. However, the silk-screen printing on the PWB has changed as indicated below. (Before change) N1227FC (After change) 1-N1227FC 3.Action: Running change. 1/2 Green C SHARP CORPORATION Reprography Division Current parts Ref. No. Model name Version P/G No. Parts code 0CW4067K519// Ver.: S01010 New parts Parts code 0CW4067K519G/ Ver.: S01011 0CW4067K517G/ Price rank AZ Parts name Effec- Intertive changetime ability Note All 1 AR-5132 SEC Canada 62 ROM ass'y 1st lot '97/9 3 62 -901 0CW4067K517// 0CW4067K518G/ BV PBA control PC | ||
File name ARE059.PDF Date : Nov. 20, 1997 DIGITAL COPIER : AR-5132 No. : ARE-059 [Service Information] REGARDING REVISIONS TO THE PARTS GUIDE FOR AR-5132. 1.Model Name: AR-5132 2.General: We have revised mistakes in the parts guide for the above model. 3.Description: 38 RADF: Paper feeding transport section 2 Current parts P/G No. Parts code 38 -68 0CW2214P102// Parts code 0CW2223P102// New parts Price rank AH Parts name Plate 1 1/3 Green C SHARP CORPORATION Reprography Division 2/3 3/3 | ||
File name ARE060.PDF Date : Feb. 9, 1998 DIGITAL COPIER : AR-5132 No. : ARE-060 [Service Information] ESTABLISHMENT OF THE TONER TRANSPORT PIPE A TTACHMENT ARRON ALPHA801 F AS ASERVICE PART. 1.Model Name: AR-5132 2.General: The toner transport pipe attachment Arron alpha 801 F of the DV unit section has been established as a service part. 3.Description: The Arron alpha 801F (20g/unit) has been established as a service part. The part code for the Arron alpha 801F is UKOG-0256FCZZ. Arron alpha 801F Two droplets in the semi-portal direction (approx. 0.5g) With a limit Area of application after adhesion operations have been completed (the bottom surface of the U-groove) Adhesion standard Toner transport pipe The engraved lettering should face upward Toner transport pipe Toner transport pipe attachment diagram 1/2 Green C SHARP CORPORATION Reprography Division Current parts Ref. No. Model name Version P/G No. Parts code All ------- New parts Parts code UKOG-0256FCZZ Price rank BH Parts name Effec- Intertive changetime ability ---6 Note AR-5132 Arron alpha 801F (20g/unit) | ||
File name ARE061.PDF Date : Dec. 19, 1997 DIGITAL COPIER : AR-5130/5040 No. : ARE-061 1.CHANGE CARRIED OUT IN THE CG-ROM IN THE OPERA TIONS CONTROL PWB TO A MASK ROM. 2.CHANGE CARRIED OUT IN THE PAPER DELIVERY SCREW PARTS. 1. Change carried out in the CG-ROM in the operations control PWB to a mask ROM. 1.Model Name: AR-5130 2.General: Achange has been carried out in the CG-ROM (IC 305) in the operations control PWB. The ROM has been changed to a mask ROM. This action has been carried out as a measure to improve productivity. [Old] VHITC532000AF [New] VHILH532K7K-1 For identification, LH532K7K is silk-screen printed on the CG-ROM. 3.Action: From the 1st lot of 1997 October production. 2. Change carried out in the paper delivery screw parts. 1.Model Name: AR-5040 2.General: The paper delivery screw Awhich was used in the toner box unit and the DR cleaner unit has been discontinued. In its place, the C16 toner screw HI/E unit is now being used. This action has been carried out as a measure to establish interchangeability of parts with other models. 1/2 Green C SHARP CORPORATION Reprography Division [Old] NSRW-0009FCZZ (Transport screw) [New] NSRW-0026FCZZ (C16 toner screw HI) NSRW-0010FCZZ (Transport screw A) NSRW-0026FCZ1 (C16 toner screw E) 3.Action: From the 1st lot of 1997 October production. Current parts Ref. No. Model name Version P/G No. Parts code 38 -47 16 -32 NSRW-0009FCZZ All 2 AR-5040 16 -33 NSRW-0010FCZZ 18 -72 | ||
File name ARE062.PDF Date : Dec. 26, 1997 DIGITAL COPIER : AR-5132 No. : ARE-062 1. CHANGE CARRIED OUT IN THE METHOD OF A TTACHMENT OF THE OC A TTACHMENT PLA TE. 2. MEASURE TO ALLEVIA PROBLEMS OF BLURRING OF THE COPY TE IMAGES. 1. Change carried out in the method of attachment of the OC attachment plate. 1.Model Name: AR-5132 2.General: Achange has been carried out in the fixing screws and the fixing screw retainer positions. This action has been carried out as a measure to secure and stabilize the OC attachment plate in the optical unit. Screw retainer (XHBSE40P10000) OC Attachment plate (The change described above has been carried out in the same way to the OC attachment plate on the left side of the machine.) 3.Action: From 1997 mid-October production. 1/2 Green C SHARP CORPORATION Reprography Division 2. Measure to alleviate problems of blurring of the copy images. 1.Model Name: AR-5132 (Only for machines of the 200V series) 2.General: There was a possibility of copy image blurring occurring in the machines of the 200 V series due to a problem in the ICU PWB. As a measure to alleviate this problem, a change has been carried out to a portion of the resistors in the ICU PWB. [Old] [New] Part code: VRS-TS2AD470J VRS-TS2AD000J Locations where the action described above has been carried out: R830/R831/R832/R833/R834/R835/R836/R837 (Total: 8 locations) 3.Action: From the 1st lot of 1997 October production. Current parts Ref. No. Model name Version P/G No. Parts code XBPSD40P06KS0 (Q'ty: 9 5) VRS-TS2AD470J (Q'ty: 12 4) New parts Parts code XHBSE40P10000 (Q'ty: 4 8) AA VRS-TS2AD000J (Q'ty: 8) Price rank Parts name Effec- Intertive changeability time Mid'97/10 3 1st lot '97/10 Note 1 AR-5132 2 All 4 Screw (M4 × 6) 200V series | ||
File name ARE063.PDF Date : Dec. 26, 1997 DIGITAL COPIER : AR-5132 No. : ARE-063 CHANGE CARRIED OUT IN THE SHAPE OF CENTER TRA Y. 1.Model Name: AR-5132 2.General: There have been problems of paper jams occurring when paper feeding operations are carried out from the ADU due to the copy paper getting caught on some of the holes between the paper feeding ribs. As a measure to alleviate this problem, a change has been carried out in the metal mold, and the holes have been filled in. In addition to this action, the addition of a harness retainer sheet has been carried out. Furthermore, at the same time, the addition of a notch has been carried out to the interfering section of the center tray. This action has been carried out as a measure to prevent contact between the center tray and the machine rear frame PWB supporter. The addition of a notch has been carried out to the section of the center tray which interferes when loading the tray into the machine. The holes (Qty: 7) have been filled in, and at the same time the addition of a harness retainer sheet has been carried out to the rear side of the center tray. 1/2 Green C SHARP CORPORATION Reprography Division Attachment standard for the harness retainer sheet. In contact with the rail attachment screws Edge of the rail Harness retainer sheet 3.Action: From 1997 mid-October production. Current parts Ref. No. Model name Version P/G No. Parts code 33 -38 AR-5132 All 41 ---43 | ||
File name ARE064.PDF Date : Jan. 9, 1998 DIGITAL COPIER : AR-5132 No. : ARE-064 CHANGE CARRIED OUT IN THE SHAPE OF HANDLE OF THE PAPER FEED COVER. 1.Model Name: AR-5132 2.General: Achange has been carried out in the shape of the handle of the paper feed cover. This action has been carried out as a measure to improve operationability. In accordance with this change, a change has also been carried out in the color of the resist guide. Black has been changed to OAgray. · Cross section of the paper feed cover (Old) 0CW2214P008C/ (New) 0CW2214P008D/ 3.Action: From the 1st lot of 1997 October production. 1/2 Green C SHARP CORPORATION Reprography Division Current parts Ref. No. Model name Version P/G No. Parts code 38 -20 AR-5132 All 38 -21 | ||
File name ARE065.PDF Date : Dec. 26, 1997 DIGITAL COPIER : AR-5132 No. : ARE-065 [Service Information] CORRECTIONS CARRIED OUT IN THE PARTS GUIDE OF MODELAR-5132. 1.Model Name: AR-5132 2.General: There was an error in the parts guide of the model listed above, and has been corrected. 3.Description: Current parts Version P/G No. Parts code 200V series 1 ---Parts code PCUSS0001GCZZ New parts Price rank AE Parts name Gasket Added Gasket 1/2 Green C SHARP CORPORATION Reprography Division 4 Optical section Current parts New parts Parts code PGSK-1002LCZZ Price rank AC Parts name P/G No. Parts code Version 200V series 4 - ---- Gasket Added Gasket 12 Optical frame 2 Current parts Version P/G No. Parts code Parts code PGSK-0016FCZZ 200V series 12 ---PGSK-0015FCZZ AN New parts Price rank AG Gasket Parts name Added Gasket PGSK-0016FCZZ Added Gasket PGSK-0015FCZZ 10 Rear frame 2 Current parts Version P/G No. Parts code 200V series 10 -27 DHAI-2776FCZZ Parts code DHAI-2776FC11 New parts Price rank AZ Parts name AC harness 2/2 | ||
File name ARE066.PDF Date : Jan. 9, 1998 DIGITAL COPIER : AR-5132 No. : ARE-066 MEASURE TO ESTABLISH INTERCHANGEABILITY OF PARTS IN THE PAPER FEED TRA UNIT. Y 1.Model Name: AR-5132 2.General: Achange has been carried out in the original tray and the tray sensor lever. This action has been carried out as a measure to establish interchangeability of parts with other models. Change items that were carried out in the original tray unit. [Old] [New] Added hole Change items that were carried out in the tray sensor lever. [Old] [New] 3.Action: From 1997 mid-October production. 1/2 Green C SHARP CORPORATION Reprography Division Current parts Ref. No. Model name Version P/G No. Parts code 35 -11 AR-5132 All 35 -19 | ||
File name ARE067.PDF Date : Jan. 9, 1998 DIGITAL COPIER : AR-5132 No. : ARE-067 [Service Information] CORRECTIONS CARRIED OUT IN THE PARTS GUIDE OF MODELAR-5132. 1.Model Name: AR-5132 2.General: There were some errors found in the parts guide of the model listed above. The errors have been corrected, and are hereby reported. 3.Description: There were some errors found in the part codes and part names in the parts guide list [42]-8 and [43]-4 (please refer to the lists shown below). These errors have been corrected. ``2" has been corrected to ''1". ``1" has been corrected to ''2". SHARP CORPORATION Reprography Division Green C | ||
File name ARE068.PDF Date : Jan. 19, 1998 DIGITAL COPIER : AR-5040 No. : ARE-068 1. CHANGE CARRIED OUT IN THE PRINTED CONTENT OF THE MSDS CARD. 2. MEASURE TO PREVENT CHAFFING OF THE COPY PAPER. 3. MEASURE TO ALLEVIA PROBLEMS OF ABNORMAL NOISE FROM TE THE COPY PAPER FEED DRIVE UNIT. 1. Change carried out in the printed content of the MSDS card. 1.Model Name: AR-5040 (only for machines bound for the U.S.A., U.K. Canada markets). 2.General: There was a change that was carried out in the type of material used for the carbon block used for the toner. In accordance with this change a change has also been carried out in the written content of the MSDS card. 3.Action: From 1996 October production. 2. Measure to prevent chaffing of the copy paper. 1.Model Name: AR-5040 2.General: There have been problems of the edges of the copy paper chaffing against the paper guide of the delivery guide section of the finisher. As a measure to alleviate this trouble, a change has been carried out in the curved position of the delivery guide frame F and R. This change has been carried out as a way to bring the delivery paper guide more forward. Changed screw 3.Action: From the 1st lot of 1995 December production. 1/2 Green C SHARP CORPORATION Reprography Division 3. Measure to alleviate problems of abnormal noise from the copy paper feed drive unit. 1.Model Name: AR-5040 2.General: There was a possibility of abnormal noise occurring due to the end portion of the belt in the copy paper feed drive unit coming in contact with the pulley cover. As a measure to alleviate this problem, the direction of the face of the pulley cover has been reversed. P/G 28 Reverse the direction of the face of the part. 3.Action: From the 1st lot of 1996 August production. Current parts Ref. No. Model name Version P/G No. Parts code U.S.A. U.K. Canada New parts Parts code Price rank Parts name Effec- Intertive changeability time Note 1 AR-5040 74 -22 TCADZ1163FCZZ TCADZ1163FCZ1 AK MSDS Card '96/10 6 57 -16 2 AR-5040 All 57 -29 57 -6 | ||
File name ARE069.PDF Date : Jan. 19, 1998 DIGITAL COPIER : AR-5040 No. : ARE-069 [Service Information] CHANGE IN THE MAKER CARRIED OUT AS A MEASURE TO IMPROVE PRODUCTIVITY . 1.Model Name: AR-5040 2.General: Achange has been carried out in the maker of some of the parts. This action has been carried out as a measure to improve productivity. In accordance with this change a change has also been carried out in the part codes. 3.Action: From the 1st lot of 1996 June production. Current parts Ref. No. Model name Version P/G No. Parts code 68 -48 AR-5040 All 35 -6 | ||
File name ARE071.PDF Date : Jan. 19, 1998 DIGITAL COPIER : AR-5132 No. : ARE-071 CHANGE IN THE A TTACHMENT SCREWS OF THE F AN A TTACHMENT PLA CARRIED OUT AS A MEASURE TO TE IMPROVE PRODUCTIVITY. 1.Model Name: AR-5132 2.General: Achange has been carried out in the attachment screws of the fan attachment plate. This action has been carried out as a measure to improve productivity. The attachment screws have been changed from M4 × 10 screws to M4 × 6 screws. Fan attachment plate Changed screw (M4 × 10 M4 × 6) Changed screw (M4 × 10 M4 × 6) 3.Action: From 1997 mid-November production. Current parts Ref. No. Model name Version P/G No. Parts code Parts code New parts Price rank AA Parts name Effec- Intertive changetime ability Mid'97/11 Note AR-5132 All 7 -18 XHBSE40P10000 LX-BZ0502FCZZ Screw (M4 × 10) 1 | ||
File name ARE072.PDF Date : Jan. 19, 1998 DIGITAL COPIER : AR-5132 No. : ARE-072 MEASURE TO ALLEVIA PROBLEMS OF FUSING JAMS TE DURING DOUBLE SIDE COPY OPERA TIONS. 1.Model Name: AR-5132 2.General: There have been problems of jams occurring during double side copy operations using A3 size copy paper in the 200 V series markets. As a measure to alleviate this trouble, the attachment of a duct sheet has been carried out in the ducts of the main body of the machines. In addition, ribs have been designed to attach the duct sheets in the ducts. It is important to note that in the case of machines in the 100 V series markets, the ducts of the main body of the machines in which the ribs have been added are in fact being used, but the duct sheets have not been attached. The main body duct The main body duct sheet 3.Action: Ref. No. Model name AR-5132 (200 V series): AR-5132 (100 V series): From the 1st lot of 1997 September production. Running change from 1997 September production. New parts Parts code PSHEP4505FCZZ Price rank AE Parts name Effec- Intertive changeability time 6 1st lot '97/9 1 Current parts Version P/G No. Parts code 11 ---- Note Australia U.K. SEEG AR-5132 (200V series) 100V series | ||
File name ARE073.PDF Date : Jan. 19, 1998 DIGITAL COPIER : AR-5132 No. : ARE-073 1. MEASURE TO STABILIZE THE RETURN OF THE PPD1 ACTUA TOR. 2. MEASURE TO ALLEVIA PROBLEMS OF DIAGONAL FEEDING OF THE ORIGINAL TE DOCUMENTS IN THE ADF . 3. CHANGE IN THE A TTACHMENT SCREWS OF THE F A AN TTACHMENT BASE PLA TE CARRIED OUT AS AMEASURE TO IMPROVE OPERA TIONABILITY. 4. CHANGE IN THE PART CODE CARRIED OUT IN ACCORDANCE WITH ACHANGE IN THE MAKER (ACTION CARRIED OUT AS AMEASURE TO IMPROVE PRODUCTIVITY). 1. Measure to stabilize the return of the PPD1 actuator. 1.Model Name: AR-5132 2.General: Achange has been carried out in the load of the pawl spring. This action has been carried out as a measure to stabilize the return of the PPD1 actuator in the transport DV guide unit. 3.Action: Running change from 1997 September production. 2. Measure to alleviate problems of diagonal feeding of the original documents in the ADF . 1.Model Name: AR-5132 2.General: There have been problems of diagonal feeding of original documents during copy operations using the ADFAs a measure to alleviate this problem, a change has been . carried out in the ADF attachment step screws of the rear cabinet upper. 3.Action: From the 1st lot of 1997 November production. 1/3 Green C SHARP CORPORATION Reprography Division 3. Change in the attachment screws of the fan attachment base plate carried out as a measure to improve operationability. 1.Model Name: AR-5132 2.General: Achange has been carried out in the attachment screws of the fan attachment base plate. This action has been carried out as a measure to improve operationability. Chenged screws 3.Action: Running change from 1997 November production. 4. Change in the part code carried out in accordance with a change in the maker (action carried out as a measure to improve productivity). 1.Model Name: AR-5040 2.General: Achange was carried out in the maker of a portion of the outer case. In accordance with this change a change has also been carried out in the part code. 3.Action: From 1997 December production. 2/3 Current parts Ref. No. Model name Version P/G No. Parts code 20 -46 AR-5132 3 -23 7 -18 35 48 -8 48 -5 All 48 -7 1 -9 4 AR-5040 1 -13 1 -5 1 -11 1 -10 1 -17 1 -20 1 -14 | ||
File name ARE074.PDF Date : Jan. 19, 1998 DIGITAL COPIER : AR-5132 No. : ARE-074 [Service Information] CORRECTIONS CARRIED OUT IN THE PARTS GUIDE. 1.Model Name: AR-5132 2.General: There were some errors found in the parts guide of the model listed above. The errors have been corrected, and are hereby reported. 3.Description: [1] Achange has been carried out in the shape of illustration No. 15 of the outer case and its attachment position as described in the figure shown below. Eliminated Added SHARP CORPORATION Reprography Division Green C | ||
File name ARE075.PDF Date : Jan. 26, 1998 DIGITAL COPIER : AR-5132 No. : ARE-075 1.CHANGE CARRIED OUT IN THE PART CODE FOR THE LASER SCANNER UNIT. 2.CHANGE CARRIED OUT IN THE MA TERIALS USED IN THE TRANSFORMER FIXING PLA TE. 1. Change carried out in the part code for the laser scanner unit. 1.Model Name: AR-5132 2.General: Achange has been carried out in the maker of the parts for the laser scanner unit. This action has been carried out as a measure to improve productivity. In accordance with this change a change has also been carried out in the part code. Laser scanner PC | ||
File name ARE076.PDF Date : Jan. 26, 1998 DIGITAL COPIER : AR-5132/5040 No. : ARE-076 MEASURE TO ESTABLISH PARTS INTERCHANGEABILITY OF THE LIFT PLA TE. 1.Model Name: AR-5132/5040 2.General: Achange has been carried out in the lift plate. This action has been carried out as a measure to establish parts interchangeability with other models. 3.Action: From the start of 1997 November production. Current parts Ref. No. Model name Version P/G No. Parts code 30 -18 AR-5132 All AR-5040 | ||
File name ARE077.PDF Date : Feb. 27, 1998 DIGITAL COPIER : AR-5132 etc. No. : ARE-077 1.CHANGE CARRIED OUT IN THE PARTS USED IN THE TRA DRA Y WER UNIT. 2.CHANGECARRIED OUT IN THE PARTSUSEDINTHETRAASSEMBLYDRA Y WERUNIT . 3.CHANGE CARRIED OUT IN THE PARTS USED IN THE ADU UNIT. 1. Change carried out in the parts used in the tray drawer unit. 1.Model Name: AR-5132/5040 2.General: The bit insert of the tray handle attachment section has been discontinued, and the part is now attached by a binding screw fixing method. This action has been carried out as a measure to improve productivity. 3.Interchangeability: Old parts are interchangeable only with old parts, and new parts are interchangeable only with new parts. | ||
File name ARE078.PDF Date : Feb. 27, 1998 DIGITAL COPIER : AR-5132 No. : ARE-078 CHANGE CARRIED OUT IN GEAR 28T INSIDE THE TONER HOPPER UNIT. 1.Model Name: AR-5132 2.General: Achange has been carried out in the maker of the gear 28T used inside the toner hopper unit. This action has been carried out as a measure to improve productivity. In accordance with this change a change has also been carried out in the part code, as shown below. | ||
File name ARE079.PDF Date : Mar. 2, 1998 DIGITAL COPIER : AR-5132 No. : ARE-079 CHANGE CARRIED OUT IN THE IC OF THE ICU PWB. 1.Model Name: AR-5132 2.General: Achange has been carried out in the IC of the ICU PWB. This action has been carried out as a measure to improve the reliability of the part. | ||
File name ARE080.PDF Date : Mar. 24, 1998 DIGITAL COPIER : AR-5132/5040 No. : ARE-080 CHANGE IN THE 500 TRA COPY PAPER FEEDING UNIT CARRIED OUT Y AS AMEASURE TO ESTABLISH INTERCHANGEABILITY OF PARTS BETWEEN MODELS. 1.Model Name: AR-5132/5040 2.General: The change in the 500 tray copy paper feeding unit described below has been carried out as a measure to establish interchangeability of parts between models. (Old) DUNT-6546FC13 (New) DUNT-6923FCZZ Please refer to the following pages for details concerning the composition parts of the new unit. 3. Interchangeability: Parts (unit assemblies) are interchangeable between old and new units. [It is important to note that unit assembly parts (individual parts) are not interchangeable, and it is therefore necessary to exercise caution when carrying out replacement operations.] 4.Action: From the start of 1998 February production. 1/4 Green C SHARP CORPORATION Reprography Division 500 paper feeding unit 2/4 Current parts Ref. No. Model name Version P/G No. Parts code 41 -901 All AR-5132 44 -33 25 -901 DUNT-6546FC13 New parts Parts code Price rank Parts name Effec- Intertive changetime ability Note AR-5040 DUNT-6923FCZZ BM 500 paper feeding unit 1 -1 -2 -3 -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 -14 -15 -16 -17 -18 -19 -20 ------------------------------------------------------------- NROLR1219FCZZ NGERH1263FCZZ NSFTZ2483FCZZ XRESP50-06000 NGERH1274FCZZ LSTPP0279FCZZ MLEVP0761FCZZ NROLR1218FCZZ NGERH1275FCZZ MLEVP0762FCZZ XRESP70-08000 NBRGP0549FCZZ NSFTZ2485FCZZ MSPRC2658FCZZ VHPGP1A71A1-1 MLEVP0588FCZZ MSPRC2699FCZZ LPINS0317FCZZ MARMP0250FCZZ RPLU-0327FCZZ AL AC AE AA AC AB AD AL AM AD AA AC AP AC AG AB AC AB AC AQ Pick up roller Pick up roller gear CG pick up roller shaft E type ring Idle gear Stopper Pick up roller lever L Paper feeding roller Paper feeding roller gear Pick up roller lever R E type ring Bearing Paper feeding roller shaft PF earth spring Photo sensor Solenoid lever Solenoid lever spring Spring pin Solenoid arm Pick up solenoid 1st lot '98/2 6 3/4 Current parts Ref. No. Model name Version P/G No. Parts code New parts Parts code DHAI-2049FCZZ XEBSD30P12000 PCLC-0279FCZZ LBRC-0048FCZ2 LPLTM4057FCZ1 Price rank AQ AA AV AQ AH Parts name Effec- Intertive changetime ability Note -21 -22 -23 -24 -25 -26 -27 -28 -29 -30 -31 -32 -33 -34 -35 -36 -37 -38 -39 -40 -41 -42 -43 | ||
File name ARE082.PDF Date : May. 15, 1998 DIGITAL COPIER : AR-5132 No. : ARE-082 CHANGES CARRIED OUT IN SOME OF THE PARTS IN THE ADU UNIT . 1.Model Name: AR-5132 2.General: Changes have been carried out in the makers of the parts listed below. This action has been carried out as a measure to improve productivity. In accordance with these changes, changes has also been carried out in the part codes. 3.Action: From the start of 1998 March production. Current parts Ref. No. Model name Version P/G No. Parts code 33 -21 33 -28 AR-5132 All 33 -29 33 -22 | ||
File name ARE083.PDF Date : May. 21, 1998 DIGITAL COPIER : AR-5132 No. : ARE-083 [Service Information] CORRECTIONS CARRIED OUT TO THE PARTS GUIDE OF MODEL AR-5132. 1.Model Name: AR-5132 2.General: There was an error discovered in the parts guides of the model listed above. The error has been corrected and is hereby reported. 3.Description: The part code of the pick up roller of the desk LCC paper feeding unit was not correct and has therefore been corrected. [Parts Location Diagram] Pick up roller Desk LCC paper feeding unit Current parts Version P/G No. Parts code Overseas 43 -12 0CW4051P320// New parts Parts code 0CW4051P397// Price rank AS Parts name Effec- Intertive changetime ability 1st lot 3 Note Pick up roller SHARP CORPORATION Reprography Division Green C | ||
File name ARE084.PDF Date : Jun. 2, 1998 DIGITAL COPIER : AR-5132 No. : ARE-084 1. CHANGE CARRIED OUT IN THE ADJUSTMENT RANGE OF THE (LCD) BRIGHTNESS CONTROL FUNCTION OF THE MESSAGE DISPLAY. 2. CHANGE CARRIED OUT IN THE GROUNDING TERMI NAL OF THE AC CORD SECTION. 1. Change carried out in the adjustment range of the (LCD) brightness control function of the message display. 1.Model Name: AR-5132 2.General: The adjustment range of the darken control of the (LCD) brightness control functions of the message display was too narrow, and as a measure to alleviate the problem the change described below was carried out in the resistance in the operations control PWB. As a result of the change, the general, overall adjustment range was shifted to a darker level. | ||
File name ARE085.PDF Date : Jun. 22, 1998 DIGITAL COPIER : AR-5132 No. : ARE-085 1. MEASURE TO ALLEVIA PROBLEMS OF THE TONER LEAKING FROM THE TE TONER HOPPER. 2. CHANGE CARRIED OUT IN THE COPY PAPER CASSETTE IN MACHINES BOUND FOR THE CHINESE MARKET. 3. MEASURE TO ALLEVIA PROBLEMS OF CURLING DURING PAPER FEEDING TE OPERA TIONS IN THE ADU UNIT. 1. Measure to alleviate problems of the toner leaking from the toner hopper. 1.Model Name: AR-5132 2.General: There have been problems of the toner leaking from the mixing shaft section during toner feeding operations. As a measure to alleviate this problem, the addition of a cover sheet has been carried out. Attachment standard Attachment standard Attachment standard Hopper cover sheet R Note: <1> All attachment surfaces should be wiped with alcohol. (In particular, care should be exercised to wipe the bottom surfaces of the ribs.) <2> Remove the sheet attached on the two-sided tape, bend surface (B) of the sheet along the bending standard (A) and attach. <3> Attach to the hopper ribs. 3.Action: Running change from 1998 February production. 1/2 Green C SHARP CORPORATION Reprography Division 2. Change carried out in the copy paper cassette in machines bound for the Chinese market. 1.Model Name: AR-5132/5040 2.General: The addition of holes for original document tray insertion, and of paper size markings has been carried out to the copy paper cassette of models SF-2025 and 2052 in machines bound for the Chinese market. This action has been carried out as a measure to comply with Chinese standards. In accordance with the change described above a change has also been carried out in the same copy paper cassette of all of the models listed above. It is important to note that with the exception of machines bound for the Chinese market, all other old and new parts are interchangeable. 3.Action: From the 1st lot of 1998 January production. 3. Measure to alleviate problems of curling during paper feeding operations in the ADU unit. 1.Model Name: AR-5132 2.General: Achange has been carried out in the inner diameter of the clutch spring of the calling roller to increase the transport power. This action has been carried out as a measure to alleviate problems of paper curling during ADU paper feeding operations. In addition to the change described above, a change has also been carried out in the color of the spring. The new springs are gray. 3.Action: From the 1st lot of 1998 April production. Current parts Ref. No. Model name Version P/G No. Parts code 14 44 -18 GCASP0156FCZ1 2 AR-5132 3 | ||
File name ARE086.PDF Date : Jun. 8, 1998 DIGITAL COPIER : AR-5132 No. : ARE-086 [Service Information] CORRECTIONS CARRIED OUT IN THE PARTS GUIDE OF MODEL AR-5132. 1.Model Name: AR-5132 2.General: There were some errors found in the parts guide of the model listed above. The errors have been corrected and are hereby reported. 3.Description: There was an error found in the parts guide of the model listed above. The part code for Block [42] - No. 9 Gear was incorrect and has been corrected as shown below. [42] Desk: Paper feeding jam cover section. Current parts P/G No. Parts code Parts code New parts Price rank AE Parts name 42 -9 0CW4067P010// 0CW4051P034// Gear (GER-0.8-20) SHARP CORPORATION Reprography Division Green C | ||
File name ARE088.PDF Date : Jun. 29, 1998 DIGITAL COPIER : AR-5132 No. : ARE-088 1. ACTION TO PREVENT CONTACT BETWEEN THE COVER OF THE DARK BOX AND THE COPY LAMP UNIT. 2. DISCONTINUANCE OF THE SCREW HOLE TAPPING IN THE F A AN TTACHMENT PLA CARRIED OUT AS AMEASURE TO IMPROVE PRODUCTIVITY. TE, 1. Action to prevent contact between the cover of the dark box and the copy lamp unit. 1.Model Name: AR-5132 (only for machines bound for the 200 V series market destinations). 2.General: There have been problems reported of contact between the CCD unit and the dark box cover during scanning operations of the copy lamp. As a measure to alleviate this problem, a change has been carried out in the dimensions of the gasket which is attached in the gap between the CCD unit and the dark box cover, and a change in the cover of the dark box has been carried to so that it does not rise up. Attachment should be carried out in approximately the center. Gasket PGSK-0020FCZZ Attachment standard Gasket (l = 100 mm) CCD unit Upper dark box (Inner side of the upper dark box) 3.Action: From the start of 1998 May production. 1/2 Green C SHARP CORPORATION Reprography Division 2. Discontinuance of the screw hole tapping in the fan attachment plate, carried out as a measure to improve productivity. 1.Model Name: AR-5132 2.General: The tapping of the screw holes in the fan attachment plate have been discontinued. This action has been carried out as a measure to improve productivity. In accordance with the discontinuance of the screw hole tapping, a change has also been carried out in the attachment screws. Discontinued screw hole tapping and changed attachment screw. Discontinued screw hole tapping and changed attachment screw. 3.Action: Running change from 1998 August production. Current parts Ref. No. Model name Version P/G No. Parts code New parts Parts code Price rank AK AA Parts name Effec- Intertive changeability time 1st lot '98/5 Note 1 AR-5132 2 200V series All | ||
File name ARE089.PDF Date: Jun. 24, 1998 DISITAL COPIER: AR-5040 No. : ARE-089 1. Use of recycled material 1. Use of recycled material 1. Model Name: AR-5040 As the environmental countermeasure, some resin parts of the above models are changed to those which use the recycled materials. For the relevant parts and part codes, also refer to the parts list. From the middle of the production in May, 1998 (Running change) 2. General: 3. Action: Current parts Ref. No. Model name Version P/G No. Parts code PGIDM1445FCZZ LDAIU0466FCZZ New parts Parts code PGIDM1445FCZ1 LDAIU0466FC10 Price rank AP Parts name Effec- Intertive change- Note time ability 16 - 8 16 - 1 1 AR-5040 ALL 16 - 2 Cartridg guide Shutter Base A Upper LDAIU0466FCZ1 LDAIU0466FC11 AH Shutter Base B Upper C Shutter Base Lower Mid'98/5 1 16 - 4 | ||
File name ARE090.PDF Date : Jul. 2, 1998 DIGITAL COPIER : AR-5132 No. : ARE-090 [Service Information] CORRECTIONS CARRIED OUT IN THE PARTS GUIDE OF MODELAR-5132. 1.Model Name: AR-5132 2.General: There was an error found in the parts guide of the model listed above. The error has been corrected and is hereby reported. 3.Description: 14 Toner Hopper Section. Current parts Version P/G No. Parts code Overseas 14 ---Parts code PPIPP0194FCZZ New parts Price rank AH Parts name Toner transport pipe Added toner transport pipe SHARP CORPORATION Reprography Division Green C | ||
File name ARE091.PDF Date : Jul. 10, 1998 DIGITAL COPIER : AR-5132 No. : ARE-091 1. CHANGE IN THE SCREWS IN THE OPTICAL UNIT CARRIED OUT AS AMEASURE TO IMPROVE PRODUCTIVITY. 2. MEASURE TO ALLEVIATE PROBLEMS OF OIL OOZING FROM THE BUSHING IN THE DEVELOPING UNIT . 3. ADDITION CARRIED OUT OF AN ICU COVER SHEET. 4. MEASURE TO IMPROVE OPERATION STABILITY OF THE SHUTTER IN THE TONER BOX. 5. CHANGE CARRIED OUT IN THE MAKER CARRIED OUT AS AMEASURE TO IMPROVE PRODUCTIVITY. 1. Change in the screws in the optical unit carried out as a measure to improve productivity. 1.Model Name: AR-5132 2.General: Achange has been carried out in a portion of the screws used in the optical unit (in the locations marked with a "O" in the figure shown below). This action has been carried out as a measure to improve productivity. 3.Action: From the start of 1998 June production. 2. Measure to alleviate problems of oil oozing from the bushing in the developing unit. 1.Model Name: AR-5132 2.General: There have been problems of oil oozing from the bushing section of the developing unit which have occurred very rarely, and in accordance with the installation conditions of the machine. This problem, when it occurs, leads to other problems such as black streaks and other image trouble. As a measure to alleviate this problem, a change has been carried out in the material of the bushing. 3.Action: From 1998 mid-June production. 1/3 Green C SHARP CORPORATION Reprography Division 3. Addition carried out of an ICU cover sheet. 1.Model Name: AR-5132 2.General: There was a possibility of the optional printer board being attached in such a way that it extended past the protect sheet of the optical section when attaching the ICU cover. As a measure to alleviate this problem the addition of an ICU cover sheet has been carried out. ICU Cover sheet 3.Action: From the start of 1998 June production. 4. Measure to improve operation stability of the shutter in the toner box. 1.Model Name: AR-5040 2.General: The addition of a shutter return reinforcement spring has been carried out as a measure to stabilize the operation of the shutter of the toner box. Screw (M3 × 6 ) Shutter SP sheet Shutter SP-B 3.Action: From the start of 1998 June production. 5. Change carried out in the maker carried out as a measure to improve productivity. 1.Model Name: AR-5132/5040 2.General: Achange has been carried out in the maker of the bearing used in the manual multi paper feeding unit. This action has been carried out as a measure to improve productivity. In accordance with this change a change has also been carried out in the part code. 3.Action: From the start of 1998 June production. 2/3 Current parts Ref. No. Model name Version P/G No. Parts code 4 -48 1 4 -41 AR-5132 2 3 All ---4 AR-5040 16 15 -7 12 NBRGC0570FCZZ XBPBZ40P06K00 LX-BZ0449FCZZ New parts Parts code XBPSD40P08KS0 AA XBPSD40P06K00 NBRGC0597FCZZ PSHEP4658FCZZ MSPRC2779FCZZ AL PSHEP4663FCZZ XEBSD30P06000 AA AG AC Screw (M4× 6) Bearing | ||
File name ARE092.PDF Date : Jul. 10, 1998 DIGITAL COPIER : AR-5132 No. : ARE-092 1. CHANGE IN THE MATERIAL USED FOR THE ATTACHMENT PLATE OF THE GUIDE SWITCH IN THE TRANSPORT UNIT CARRIED OUT AS A MEASURE TO IMPROVE PRODUCTIVITY . 2. CHANGE IN THE MATERIAL OF THE LOWER GUIDE OF THE 500 TRAY PAPER FEEDING UNIT CARRIED OUT AS A MEASURE TO IMPROVE PRODUCTIVITY . 3. CHANGE IN THE SHAPE OF THE ADU OF THE ROLLER ARM CARRIED OUT AS A MEASURE TO IMPROVE PRODUCTIVITY . 1. Change in the material used for the attachment plate of the guide switch in the transport unit carried out as a measure to improve productivity. 1.Model Name: AR-5132 2.General: Achange has been carried out in the material used for the attachment plate of the guide switch in the transport unit. This action has been carried out as a measure to improve productivity. In addition to this change the tapping of the attachment holes for the guide switch has been discontinued and the screws have also been changed. Guide switch attachment plate Changed screw XBBSD40P10000 Changed screw XBPSD30P14000 XHBSD30P14000 XHBSE40P10000 3.Action: Running change carried out from 1998 mid-June production. 2. Change in the material of the lower guide of the 500 tray paper feeding unit carried out as a measure to improve productivity. 1.Model Name: AR-5040 2.General: Achange has been carried out in the material used for the lower guide in the 500 tray paper feeding unit. In addition to this change, a stopper of the pick up roller has been discontinued in one location. This action has been carried out as a measure to improve productivity. 1/3 Green C SHARP CORPORATION Reprography Division Discontinued Changed material 3.Action: From the start of 1998 June production. 3. Change in the shape of the ADU of the roller arm carried out as a measure to improve productivity. 1.Model Name: AR-5132 2.General: In accordance with a change that has been carried out in the inner diameter of the clutch spring, a change has also been carried out in the inner diameter of the ADU of the roller arm. This action has been carried out as a measure to improve operationability. Details concerning the change that has been carried out in the clutch spring are reported in Technical Report No. ARE-085. 3.Action: Running change carried out from 1998 mid-June production. 2/3 Current parts Ref. No. Model name Version P/G No. Parts code New parts Parts code Price rank AD AA AA AN ---AD Parts name Effec- Intertive changetime ability Note 19 -5 1 AR-5132 19 -7 19 -2 41 -33 2 AR-5040 41 3 AR-5132 | ||
File name ARE094.PDF Date : Jul. 22, 1998 DIGITAL COPIER : AR-5132 No. : ARE-094 MEASURE TO PREVENT PROBLEMS OF LOOSENING OF THE ATTACHMENT SCREWS OF THE CLUTCH. 1.Model Name: AR-5132 2.General: Achange has been carried out in the shape of the attachment screws of the electromagnetic clutch used in the ADU unit. The shape of the tip of the screws has been changed from a half point type to a double point type. Screw 3.Action: Running change from 1998 mid-May production. Current parts Ref. No. Model name Version P/G No. Parts code All 33 -106 PCLC-0207FCZZ New parts Parts code PCLC-0207FCZ1 Price rank AX Parts name Effec- Intertive changeability time Note AR-5132 CW electromagnetic clutch 1 | ||
File name ARE098.PDF Date : Jul. 31, 1998 DIGITAL COPIER : AR-5132 No. : ARE-098 1. DISCONTINUANCE OF THE SHIELD SEAL IN THE OPTICAL UNIT CARRIED OUT AS AMEASURE TO IMPROVE PRODUCTIVITY. 2. CHANGE CARRIED OUT IN THE EFFECTIVE TIME REPORTED IN T/R ARE-088. 1. Discontinuance of the shield seal in the optical unit carried out as a measure to improve productivity. 1.Model Name: AR-5132 2.General: The shield seal in the optical unit has been discontinued. Also the 16 holes in two locations of the optical vibration protect sheet (PSHEG3833FCZZ) have been discontinued. This action has been carried out as a measure to improve productivity. The old optical vibration protect sheet is interchangeable with the new optical vibration protect sheet, and therefore there has been no change carried out in the part code. 3.Action: From the start of 1998 July production. 2. Change carried out in the effective time reported in T/R ARE-088. 1.Model Name: AR-5132 (only in machines bound for the 200 V series market destinations). 2.General: The action to prevent contact with the copy lamp unit was reported in T/R ARE-088 as being effective as of the start of 1998 May production. Achange in the effective time has been carried out, however, and the action reported in T/R ARE-088 is effective as of the start of 1998 July production. Current parts Ref. No. Model name Version P/G No. Parts code Parts code New parts Price rank ---Parts name Effec- Intertive changetime ability 1st lot '98/7 Note 1 AR-5132 All 12 -6 PSEL-0557FCZZ Discontinued Shield seal 6 Q'ty: 2 | ||
File name ARE099.PDF Date : Aug. 5, 1998 DIGITAL COPIER : AR-5040 No. : ARE-099 CHANGE IN THE MAKER OF THE PAPER FEEDING HARNESS CARRIED OUT AS A MEASURE TO IMPROVE PRODUCTIVITY. 1.Model Name: AR-5040 2.General: Achange in the maker of the harness used in the paper feeding section has been carried out. This action has been carried out as a measure to improve productivity. In accordance with the change described above a change has also been carried out in the part code. 3.Action: From the start of 1998 July production. Current parts Ref. No. Model name Version P/G No. Parts code New parts Parts code Price rank AQ Parts name Effec- Intertive changeability time 1st lot '98/7 Note AR-5040 All 21 -23 DHAI-2049FCZZ DHAI-2049FC11 Paper feeding harness 1 | ||
File name ARE106.PDF Date : Sep. 16, 1998 DIGITAL COPIER : AR-5132 No. : ARE-106 CHANGE IN THE SHAPE OF THE MB DRIVE SHAFT CARRIED OUT AS A MEASURE TO IMPROVE PRODUCTIVITY. 1.Model Name: AR-5132 2.General: A change has been carried out in the shape of the MB drive shaft used in the optical unit. This action has been carried out as a measure to improve productivity. The change described above has been carried out as illustrated in the diagram shown below. The unused milling of the F side has been discontinued, and shortened to the E-ring section. E-ring Optical base plate 3.Action: From the 1st lot of 1998 August production. Current parts Ref. No. Model name Version P/G No. Parts code New parts Parts code Price rank AT Parts name Effec- Intertive changetime ability 1st lot '98/8 Note AR-5132 All 4 -13 NSFTZ2207FCZZ NSFTZ2207FCZ1 MB drive shaft 1 | ||
File name ARE107.PDF Date : Sep. 18, 1998 DIGITAL COPIER : AR-5132 No. : ARE-107 CHANGE IN THE TRAY INSTRUCTION LABEL CARRIED OUT AS A MEASURE TO IMPROVE PRODUCTIVITY. 1.Model Name: AR-5132/5040 2.General: The figure in the tray instruction label has been embossed directly in the cassette, and in accordance with this change the tray instruction label has been discontinued. This action has been carried out as a measure to improve productivity. 3.Action: From the 1st lot of 1998 August production. Current parts Ref. No. Model name Version P/G No. Parts code 30 -4 TLABZ3105FCZZ AR-5132 All 48 -4 48 -18 GCASP0156FCZ2 New parts Parts code Price rank Parts name Effec- Intertive changeability time Note Discontinued ---- Tray instruction label GCASP0156FCZ3 BB Tray drawer case Tray instruction label Tray drawer case 1st lot '98/8 5 44 -4 AR-5040 44 -18 | ||
File name are182.pdf Date : Oct. 5, 1999 Digital Multi Function Copier: AR-5130/5132 No. : ARE-182 1. Simulation setting change due to addition of decurler mechanism 2. Assignment of parts code for ST upper P/G sheet guide jig ass'y 1. Simulation setting change due to addition of decurler mechanism 1. Model Name AR-5125 (except Europe) 5130/5132 AR-5122F/FR/5230F/FR/5030F/FR (* For the SF-2530 (except SEC), SF-2540 (except SEC/SECL) and AR-5125 (for SEEG, SUK and SCA), it has been executed from the 1st unit of mass production.) 2. General Since the decurler mechanism is added (in the market), the simulation setting value is changed. (1)About the measures when mounting the decurler kit in the market When mounting the decurler mechanism to each machine, change the value of SIMULATION 52-3 (ADU drive clutch OFF time setting) to the following numerical value. Model name SF2022 SF2027 SF2035 SF1125 SF2025 SF2025N SF2030 SF2030N SF2040 SF2040N SF2530 All destinations All destinations All destinations All destinations All destinations All destinations All destinations (except the models sold in China) The models sold in China All destinations All destinations (except the models sold in China) The models sold in China All destinations All destinations (except SEC, SECL) SEC, SECL All destinations (except SEC, SECL) SEC, SECL All destinations (except SEEG, SUK, SCA) SEEG, SUK, SCA All destinations All destinations All destinations All destinations All destinations All destinations All destinations All destinations Since the decurler mechanism has been mounted, no change is necessary. Change to 0. Since the decurler mechanism has been mounted, no change is necessary. Change to 0. Change to 1. Since the decurler mechanism has been mounted, no change is necessary. Change to 1. Change to 1. Change to 1. Change to 1. Change to 1. Change to 1. Change to 1. Change to 1. For the SF-2040 and SF-2040N, it is necessary to change the main ROM. (Refer to T/R S-316.) Destinations Change to 1. Change to 1. Change to 1. Change to 1. Change to 1. Change to 1. Change to 1. Change to 1. Change to 1. Execute SIM52-3 SF2540 AR5125 AR5130 AR5132 AR5122F AR5122FR AR5230F AR5230FR AR5030F AR5030FR 1/3 SHARP CORPORATION Document Division I Green C (2) | ||
File name are186.PDF Date : Nov. 8, 1999 DIGITAL COPIER(OPTION): AR-5132,SF-D23 No. : ARE-186 CHANGE CARRIED OUT IN THE CASTERS OF THE DESK UNIT. 1.Model Name: AR-5132, SF-D23 2.General: A change has been carried out in the casters. This action has been carried out as a measure to use up the stock of changed casters-100S which were described in Technical Report ARE-97. Please note that a change is also scheduled for the casters-100 after the stock of casters-100S have been completely used up. 3.Description: Part name Caster 100S Caster 100 Part code 0CW4051P385// 0CW4051P384// Quantity 2 42 4.Action: From 1999 September production. Current parts Ref. No. Model name Version P/G No. Parts code 40 -18 All SF-D23 (SF-2040) | ||
File name are200.PDF Date : Nov. 12, 1999 DIGITAL COPIER: AR-5125 No. : ARE-200 [Service Information] CORRECTIONS CARRIED OUT IN THE PARTS GUIDE. 1.Model Name: AR-5125 2.General: There was an error found in the parts guide for the model listed above. The error has been corrected and is hereby reported. 3.Description: Parts list: [2] Operational Panel Error HINDP0535FC10 HINDP0535FC11 HINDP0535FC12 23 HINDP0535FC13 HINDP0535FC14 HINDP0535FC15 HINDP0535FC16 Key sheet A English Key sheet A Germany Key sheet A French Key sheet A Spain Key sheet A Italy Key sheet A Netherlands Key sheet A Sweden Corrected HINDP0535FCZ3 HINDP0535FCZ4 HINDP0535FCZ5 HINDP0535FCZ6 HINDP0535FCZ7 HINDP0535FCZ8 HINDP0535FCZ9 AR AR AR AR AR AR AR HINDP0537FC10 HINDP0537FC11 HINDP0537FC12 26 HINDP0537FC13 HINDP0537FC14 HINDP0537FC15 HINDP0537FC16 Key sheet C English Key sheet C Germany Key sheet C French Key sheet C Spain Key sheet C Italy Key sheet C Netherlands Key sheet C Sweden HINDP0537FCZ3 HINDP0537FCZ4 HINDP0537FCZ5 HINDP0537FCZ6 HINDP0537FCZ7 HINDP0537FCZ8 HINDP0537FCZ9 AR AR AR AR AR AR AR * The same part as for model AR-5132. SHARP CORPORATION Document Division I Green C | ||
File name are250r.pdf Date : Oct. 27, 2000 DIGITAL COPIER (OPTION): AR-CL1/CL2/5040 etc. No. : ARE-250R Technical Report SUPPLY OF PAPER FEEDING ROLLER RUBBERS AS SEPARATE SERVICE PACKAGES. 1.Model Name: AR-5040/5125/5132/CL1/CL2 Technical Report No. ARE-250, which was previously issued, has been revised and is hereby issued once again. There were some unnecessary parts listed in the table of parts presented in the "General" section of the technical report. The error has been corrected and this technical report has been issued once again as No. ARE-250 (Revised). 2.General: Up to now we have supplied roller rubbers for different types of rollers--paper feeding rollers, reversing rollers, guide rollers and hand-feeding guide rollers--in sets with roller shafts. However, in response to requests from the market, we will now issue service codes for roller rubbers and make them available as separate service packages. One service package will contain 10 roller rubbers. Part codes for service packages of roller rubbers CGUMM0285FC31 Part name Guide roller Hand-feeding guide roller Reversing roller Pick-up roller Hand-feeding guide roller Hand-feeding roller Reversing roller Part code for each roller NROLR0878FCZZ CROLR0921FC01 NROLR0920FCZZ NROLR1114FCZZ CROLR1115FC01 NROLR0992FCZZ NROLR0909FCZZ CGUMM0288FC31 CGUMM0286FC31 CGUMM0287FC31 3.Action: From February 2000 production 1/2 SHARP CORPORATION Document Division I Green C Ref. No. Model name AR-5040 AR-CL1 Current parts Version P/G No. Parts code 42 New parts Parts code CGUMM0285FC31 Price rank AY Parts name InterEffective change- Note time ability Roller NS-G 5 1 AR-CL2 AR-5030 AR-5132 | ||
File name S211.PDF Date : Aug. 1, 1997 DIGITAL COPIER : AR-5132 No. : S-211 [Service Information] 1.DISCONTINUANCE OF THE PLUG CAUTION LABEL. 2.ADDITION OF THE BSI KITE MARK LABEL. 1. Discontinuance of the plug caution label. 1.Model Name: AR-5132 (only for machines bound for the U.K.) 2.General: The plug caution label which had been attached to the AC cord in machines bound for the U.K. market has been discontinued. This change has been carried out in accordance with a directive from the U.K. market. 3.Action: From the 1st lot of 1997 July production. 2. Addition of the BSI kite mark label. 1.Model Name: AR-5132 (only for machines bound for the U.K.) 2.General: Akite mark label has been attached to the left upper side of the left cabinet. This change has been carried out in accordance with the BSI standards. Note: The kite mark label is a standard label, and has therefore not been established as a service part. 3.Action: From 1997 mid-June production. Current parts Ref. No. Model name Version P/G No. Parts code Parts code New parts Price rank ---Parts name Effec- Intertive changetime ability 1st lot '97/7 Note 1 AR-5132 U.K. 50 -113 TCAUS0989FCZZ Discontinued AC plug caution label 6 | ||
File name S230.PDF Date : May. 15, 1998 DIGITAL COPIER : AR-5132 No. : S-230 CHANGE IN THE FUSING MAIN HARNESS CARRIED OUT IN THE FUSING UNIT. 1.Model Name: AR-5132 (only machines in the 200 V series) 2.General: Achange has been carried out in the fusing main harness. This action has been carried out as a measure to make further enhancement safety performance in the electric circuits of the fusing unit. | ||
File name SP2131.PDF Date : May. 16, 1997 DM11/AR-5132 No. : SP-2131 MEASURE TO PREVENT RETURN ROLLER CONTACT. 1.Model Name: SF-DM11 2.General: There were problems of the transport P guide upper of the ADU coming in contact with the return roller in the models listed above, caused by looseness. As a measure to alleviate this problem, tighteners have been added in two locations on the roller section of the transport P guide. 3.Description: Transport PG upper AS (Old) CGIDH1360FC01 (New) CGIDH1360FC02 4.Action: From the start of 1997 March production. (Temporary action has already been carried out during production for the period between mid-January production and February production.) Current parts Ref. No. Model name Version P/G No. Parts code New parts Parts code Price rank Parts name Effec- Intertive changetime ability Note SF-DM11 (SF-2022) 1 All 43 -66 Transport P guide upper AS 1st lot '97/3 SF-DM11 (SF-2025) Overseas 41 -66 (SF-2030) SF-DM11 (SF-2040) | ||
File name ste014.PDF Date : Feb. 23, 1998 COPIER : AR-5132 No. : STE-014 REGARDING MODIFICA TION OF PARTS CODES DUE TO CHANGE OF PROVIDER. 1.Model Name: AR-5132 2.General: Because the factory for manufacturing developer units and toner hopper units has changed, we have modified parts codes. 3.Action: From December, 1997 production on. Current parts Ref. No. Model name Version P/G No. Parts code All AR-5132 Inch series 14 -901 AB series | ||
File name STE021.PDF Date : Sep. 28, 1998 COPIER : AR-5132 No. : STE-021 CHANGE CARRIED OUT IN THE MATERIAL OF THE MIXING ROLLER BEARING IN THE DEVELOPING TANK. 1.Model Name: AR-5132 2.General: A change has been carried out in the material of the mixing oil-roller bearing (Teflon) used in the developing unit. This action has been carried out as a measure to improve reliability concerning the bearing. The new bearing has a higher oil retention performance (Material name: PCA04) 3.Description: A change has been carried out in the material of the mixing roller bearing of the developing unit. Bearing ø5 Teflon ø5 Bearing EX NBRGC0570FCZZ NBRGC0597FCZZ 1/2 Yellow C SHARP CORPORATION Printing and Reprographic Supplies Division 4.Interchangeability: New parts can be used in place of old ones, but old parts cannot be used in place of new ones. [How to distinguish between parts.] Hole (ø5 bearing EX) * Old parts have no holes. 5.Action: From 1998 May production. [Developing tank serial No.] Month of production. Production No. B: For machines bound for the Japanese domestic market. C: For machines bound for the overseas markets. Chinese production. Last digit of the calendar year. * For units whose last digit is greater than 5. Current parts Ref. No. Model name Version P/G No. Parts code All 15 -7 NBRGC0570FCZZ New parts Parts code NBRGC0597FCZZ Price rank AG Parts name Effec- Intertive changetime ability '98/5 3 Note AR-5132 Bearing ø5 | ||
>> Download document <<
Was this file useful ? Share Your thoughts with the other users.
User ratings and reviews for this file:
| Date | User | Rating | Comment |
Average rating for this file: 0.00 ( from 0 votes)
Similar Service Manuals :
Sharp ar-162 - Sharp SF1118SM - Sharp AR-162S Service Manual - Sharp ARM160-205 SM GB - Sharp ARM160-205 PG PWBs GB-JP - Sharp Service Manual - Sharp SF2314SM -